مطلوب مهندسين بترول

Reports To: Maintenance Engineer Company: Qatar Fabrication Company Location: Ras Laffan, Qatar<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Primary Functions The Maintenance Supervisor oversees a technical team of maintenance foremen and technicians to efficiently execute all maintenance work orders or job cards as directed by the Engineer/Planner. Integral to this role is ensuring strict compliance with the SAP PM plan and addressing specific site requirements for maintenance tasks. Additionally, the Supervisor is responsible for accurate data entry and completion of work orders. Solid trade knowledge and technical skills are essential for promptly attending to, addressing, and resolving equipment failures.<br>1) Site Management:Lead, mentor, and motivate a team of maintenance foremen and technicians to ensure the effective execution of maintenance tasks. Provide technical guidance and support to team members, fostering a culture of continuous improvement and collaboration.<br>For Mobile Plant equipment and Utilities:a) Responsible to maintain all Fixed equipment such as but not limited to CNC Equipment, PLC based Equipment, Hydraulic Equipment, other pre-fabrication machinery, welding machines, blasting, and painting equipment.b) Responsible for maintaining all portable equipment such as but not limited to welding machines, grinders, chipping guns, torches, welding ovens, rollers, manipulators.c) Responsible for maintaining mobile plant equipment such as but not limited to forklifts, MEWPs, cleaning machines, air compressors, generators, and other material handling equipment.d) Responsible to maintain Equipment in all the workshop facilities.e) Responsible for maintaining all mechanical utilities in all the workshop facilities and exterior of the yard such as utility lines and appliances.<br> For Transportation and Lifting Equipmenta) Responsible for the maintenance of all lifting and transportation equipment such as but not limited to electric overhead cranes, portal JIB cranes, all terrain and rough terrain mobile cranes, crawler cranes, shipyard transporters, self-propelled modular transporters.b) Responsible for the maintenance of all portable geared and powered lifting appliances such electric hoists, chain hoists, hydraulic jacks, pedestal jacks, load cells. Conduct TBT and work preparatory instructions to the workforce to ensure compliance to QFAB's QHSES requirements. Facilitate PTW requirements, energy isolation, HIT card and relevant safety measures as applicable. Collaborate with Maintenance Engineer in case of assistance required for maintenance quality measurement and use of precision or special tools.<br>2) Maintenance Work Orders Execution:Supervise the timely and efficient execution of all maintenance work orders or job cards assigned by the Engineer for the Planner group. Ensure that maintenance tasks are completed according to established procedures, safety guidelines, and quality standards. All manhours and resource utilization for the work order must be recorded in SAP PM WO followed by review of the Maintenance Engineer Provide spare parts and external service request to Maintenance Engineer for review and necessary action. Work order completion report to be submitted to Maintenance Engineer with all findings, actions and pending items if any. Adhere to department maintenance workflow process.<br>3) Compliance with SAP PM Plan:Enforce strict adherence to the SAP PM plan for maintenance activities, including scheduling, execution, and documentation. Monitor team performance to ensure compliance with work order requirements and deadlines.<br>4) Addressing Equipment Failures:Utilize solid trade knowledge and technical skills to promptly attend to, address, and resolve equipment failures. Collaborate with maintenance team members and other stakeholders to diagnose issues and implement effective solutions. Respond to breakdown notification and address the issues by troubleshooting and repair. Obtain technical guidance from Maintenance Engineer as and when required.<br>5) Data Entry and Completion:Oversee accurate data entry and completion for work orders in the SAP PM system, including updating work status and recording observations. Conduct regular verification of work order data to ensure accuracy and completeness.<br>6) Communication with work groups:Closely engage with Production supervisor for equipment malfunction, observations and cascade the information to Maintenance Engineer for improvements. Coordinate with production supervisor to align equipment availability and utilization plan to determine maintenance window and condition assessment.<br>Qualifications, Experience and Skills<br>Qualifications:Diploma with relevant years of work experience (in Mechanical/ Electrical/ Instrumentation/ Mechatronics).<br>Experience: 4+ Years of relevant industrial experience in the maintenance department.

Reports To: Maintenance Engineer Company: Qatar Fabrication Company Location: Ras Laffan, Qatar<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Primary Functions The Maintenance Supervisor oversees a technical team of maintenance foremen and technicians to efficiently execute all maintenance work orders or job cards as directed by the Engineer/Planner. Integral to this role is ensuring strict compliance with the SAP PM plan and addressing specific site requirements for maintenance tasks. Additionally, the Supervisor is responsible for accurate data entry and completion of work orders. Solid trade knowledge and technical skills are essential for promptly attending to, addressing, and resolving equipment failures.<br>1) Site Management:Lead, mentor, and motivate a team of maintenance foremen and technicians to ensure the effective execution of maintenance tasks. Provide technical guidance and support to team members, fostering a culture of continuous improvement and collaboration.<br>For Mobile Plant equipment and Utilities:a) Responsible to maintain all Fixed equipment such as but not limited to CNC Equipment, PLC based Equipment, Hydraulic Equipment, other pre-fabrication machinery, welding machines, blasting, and painting equipment.b) Responsible for maintaining all portable equipment such as but not limited to welding machines, grinders, chipping guns, torches, welding ovens, rollers, manipulators.c) Responsible for maintaining mobile plant equipment such as but not limited to forklifts, MEWPs, cleaning machines, air compressors, generators, and other material handling equipment.d) Responsible to maintain Equipment in all the workshop facilities.e) Responsible for maintaining all mechanical utilities in all the workshop facilities and exterior of the yard such as utility lines and appliances.<br> For Transportation and Lifting Equipmenta) Responsible for the maintenance of all lifting and transportation equipment such as but not limited to electric overhead cranes, portal JIB cranes, all terrain and rough terrain mobile cranes, crawler cranes, shipyard transporters, self-propelled modular transporters.b) Responsible for the maintenance of all portable geared and powered lifting appliances such electric hoists, chain hoists, hydraulic jacks, pedestal jacks, load cells. Conduct TBT and work preparatory instructions to the workforce to ensure compliance to QFAB's QHSES requirements. Facilitate PTW requirements, energy isolation, HIT card and relevant safety measures as applicable. Collaborate with Maintenance Engineer in case of assistance required for maintenance quality measurement and use of precision or special tools.<br>2) Maintenance Work Orders Execution:Supervise the timely and efficient execution of all maintenance work orders or job cards assigned by the Engineer for the Planner group. Ensure that maintenance tasks are completed according to established procedures, safety guidelines, and quality standards. All manhours and resource utilization for the work order must be recorded in SAP PM WO followed by review of the Maintenance Engineer Provide spare parts and external service request to Maintenance Engineer for review and necessary action. Work order completion report to be submitted to Maintenance Engineer with all findings, actions and pending items if any. Adhere to department maintenance workflow process.<br>3) Compliance with SAP PM Plan:Enforce strict adherence to the SAP PM plan for maintenance activities, including scheduling, execution, and documentation. Monitor team performance to ensure compliance with work order requirements and deadlines.<br>4) Addressing Equipment Failures:Utilize solid trade knowledge and technical skills to promptly attend to, address, and resolve equipment failures. Collaborate with maintenance team members and other stakeholders to diagnose issues and implement effective solutions. Respond to breakdown notification and address the issues by troubleshooting and repair. Obtain technical guidance from Maintenance Engineer as and when required.<br>5) Data Entry and Completion:Oversee accurate data entry and completion for work orders in the SAP PM system, including updating work status and recording observations. Conduct regular verification of work order data to ensure accuracy and completeness.<br>6) Communication with work groups:Closely engage with Production supervisor for equipment malfunction, observations and cascade the information to Maintenance Engineer for improvements. Coordinate with production supervisor to align equipment availability and utilization plan to determine maintenance window and condition assessment.<br>Qualifications, Experience and Skills<br>Qualifications:Diploma with relevant years of work experience (in Mechanical/ Electrical/ Instrumentation/ Mechatronics).<br>Experience: 4+ Years of relevant industrial experience in the maintenance department.

Reports To: Maintenance Engineer Company: Qatar Fabrication Company Location: Ras Laffan, Qatar<br>**PREFERENCE WILL BE GIVEN TO QATARI CANDIDATES**<br>Primary Functions The Maintenance Supervisor oversees a technical team of maintenance foremen and technicians to efficiently execute all maintenance work orders or job cards as directed by the Engineer/Planner. Integral to this role is ensuring strict compliance with the SAP PM plan and addressing specific site requirements for maintenance tasks. Additionally, the Supervisor is responsible for accurate data entry and completion of work orders. Solid trade knowledge and technical skills are essential for promptly attending to, addressing, and resolving equipment failures.<br>1) Site Management:Lead, mentor, and motivate a team of maintenance foremen and technicians to ensure the effective execution of maintenance tasks. Provide technical guidance and support to team members, fostering a culture of continuous improvement and collaboration.<br>For Mobile Plant equipment and Utilities:a) Responsible to maintain all Fixed equipment such as but not limited to CNC Equipment, PLC based Equipment, Hydraulic Equipment, other pre-fabrication machinery, welding machines, blasting, and painting equipment.b) Responsible for maintaining all portable equipment such as but not limited to welding machines, grinders, chipping guns, torches, welding ovens, rollers, manipulators.c) Responsible for maintaining mobile plant equipment such as but not limited to forklifts, MEWPs, cleaning machines, air compressors, generators, and other material handling equipment.d) Responsible to maintain Equipment in all the workshop facilities.e) Responsible for maintaining all mechanical utilities in all the workshop facilities and exterior of the yard such as utility lines and appliances.<br> For Transportation and Lifting Equipmenta) Responsible for the maintenance of all lifting and transportation equipment such as but not limited to electric overhead cranes, portal JIB cranes, all terrain and rough terrain mobile cranes, crawler cranes, shipyard transporters, self-propelled modular transporters.b) Responsible for the maintenance of all portable geared and powered lifting appliances such electric hoists, chain hoists, hydraulic jacks, pedestal jacks, load cells. Conduct TBT and work preparatory instructions to the workforce to ensure compliance to QFAB's QHSES requirements. Facilitate PTW requirements, energy isolation, HIT card and relevant safety measures as applicable. Collaborate with Maintenance Engineer in case of assistance required for maintenance quality measurement and use of precision or special tools.<br>2) Maintenance Work Orders Execution:Supervise the timely and efficient execution of all maintenance work orders or job cards assigned by the Engineer for the Planner group. Ensure that maintenance tasks are completed according to established procedures, safety guidelines, and quality standards. All manhours and resource utilization for the work order must be recorded in SAP PM WO followed by review of the Maintenance Engineer Provide spare parts and external service request to Maintenance Engineer for review and necessary action. Work order completion report to be submitted to Maintenance Engineer with all findings, actions and pending items if any. Adhere to department maintenance workflow process.<br>3) Compliance with SAP PM Plan:Enforce strict adherence to the SAP PM plan for maintenance activities, including scheduling, execution, and documentation. Monitor team performance to ensure compliance with work order requirements and deadlines.<br>4) Addressing Equipment Failures:Utilize solid trade knowledge and technical skills to promptly attend to, address, and resolve equipment failures. Collaborate with maintenance team members and other stakeholders to diagnose issues and implement effective solutions. Respond to breakdown notification and address the issues by troubleshooting and repair. Obtain technical guidance from Maintenance Engineer as and when required.<br>5) Data Entry and Completion:Oversee accurate data entry and completion for work orders in the SAP PM system, including updating work status and recording observations. Conduct regular verification of work order data to ensure accuracy and completeness.<br>6) Communication with work groups:Closely engage with Production supervisor for equipment malfunction, observations and cascade the information to Maintenance Engineer for improvements. Coordinate with production supervisor to align equipment availability and utilization plan to determine maintenance window and condition assessment.<br>Qualifications, Experience and Skills<br>Qualifications:Diploma with relevant years of work experience (in Mechanical/ Electrical/ Instrumentation/ Mechatronics).<br>Experience: 4+ Years of relevant industrial experience in the maintenance department.

The Electrical Power Production Technician installs, operates, and modifies electrical generating power production plants and Ground/Mobile Power Generation equipment.<br><br>ESSENTIAL JOB FUNCTIONS:<br><br>Installs and operates electrical power plants, distribution equipment, automatic transfer panels Checks equipment for serviceability Positions equipment such as gasoline, diesel, and turbine engines; generators; switchgear; air compressors; and other power plant auxiliary equipment Modifies equipment according to technical publications. Accomplishes operating and repair tasks Checks installed equipment to ensure compliance with publications, policies and directives Inspects, tests, and services component systems such as safety, fuel, lubrication, cooling, air pressure, pumps, regulators, governors, and accessory equipment Observes and interprets instruments such as ammeters, voltmeters, frequency meters, synchroscopes, automatic temperature and pressure recorders, and engine oil, fuel, and coolant gauges Adjusts engine generator systems to maintain proper voltage, current frequency, and synchronization. Synchronizes multi-generators Operates high voltage switches, circuit breakers, rheostats, and other controls on switchboards and distribution panels Performs electrical power control and distribution functions Maintains and repairs electrical power generating equipment, automatic transfer panels Performs inspections. Interprets inspection findings and determines corrective action Identifies and records engine and generator malfunctions Troubleshoots malfunctions and inspects parts for excessive wear and other conditions. Uses precision test equipment Removes, repairs, and replaces defective power generating equipment components Performs corrosion control Inspects and replaces gauges and meters. Bench checks components and subassemblies Tests and calibrates repaired items Reviews performance data and maintenance records to determine adequacy of maintenance Interprets data related to electrical power generating systems to prevent potential systems failure Advises on problems installing and repairing electrical power production equipment Solves maintenance problems Studies layout drawings and wiring and schematic diagrams. Analyzes construction and operating characteristics Develops and establishes maintenance and operating procedures to ensure maximum efficiency Maintains records. Posts entries on operation, inspection, and maintenance record. Records meter readings, wear and alignment measurements, fuel consumption, and other data in performance logs Furnishes information for reports and recommends changes to correct defective equipment or improve operating procedures. Complies with environmental policies Performs other duties as required<br><br>Requirements<br><br>EDUCATION & EXPERIENCE:<br><br>High School diploma or equivalent A minimum of 5 years' experience in functions such as operation and maintenance of engines, generators, and distribution components of electric power production equipment to include a variety of makes/models. Task-certified 5-Level AAS Power Pro<br><br>KNOWLEDGE & SKILLS:<br><br>Must possess strong organizational skills with attention to detail and follow up Must be able to multi-task in a fast-paced environment Must be customer service oriented Must have excellent verbal and writing skills; be skilled and proficient with Microsoft programs such as Excel, Word, and Power Point Must have experience in electronics and electricity, including generation, conversion, transformation, distribution, and utilization; types, capacity, and purpose of low/ medium voltage circuits, circuit breakers, switches, fuses, regulators, relays, instruments, and meters associated with electric generation and distribution; interpreting instrument and meter readings; wiring diagrams, schematics, drawings and technical publications; techniques of operating and maintaining internal combustion engines, generator, generating plants, distribution panels, and accessory equipment; use and purpose of test equipment; safety rules and practices; environmental policies; principles of management; and operation and repair of electrical power production systems<br><br>ADDITIONAL REQUIREMENTS:<br><br>Must possess a valid U. S. Driver's License Possess a valid U. S. Passport (preferred) Able to obtain and maintain a valid Residency Visa for Qatar Must be able to work in extreme environmental conditions including dust and high temperatures Must be able to endure long hours, exposure to weather and hazardous conditions<br><br>TRAVEL: 100%, in deployed location.<br><br>SECURITY CLEARANCE: Must have and maintain a DoD Secret Clearance.<br><br>Global Dimensions does not discriminate on the basis of race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity or any other reason prohibited by law in provision of employment opportunities and benefits. Equal Opportunity Employer/Veterans/Disabled.

Building on our past. Ready for the future<br><br>Worley is a global professional services company of energy, chemicals and resources experts. We partner with customers to deliver projects and create value over the life of their assets. We’re bridging two worlds, moving towards more sustainable energy sources, while helping to provide the energy, chemicals and resources needed now.<br><br>Responsibilities<br><br>Manage electrical engineering services that meet Worley', its customers' and applicable statutory and regulatory specifications, on time and within budget. Manage electrical engineering project requirements. Manage electrical engineering services such as:participate in relevant meetings, prepare progress reports and comply with required checking procedures;ensure the project scope is clear and that changes comply with project change management processes;provide advice during procurement, construction and commissioning activities. For example, oversee requisitions, technical bid evaluations and purchase order preparation. Act as the electrical engineering Lead on specific projects. If responsible for a team:outline project requirements including actively promoting workshare, where appropriate, assign tasks and supervise progress; andensure the required services meet Worley, its customers and applicable statutory and regulatory requirements, on time and within budget. Proactively resolve any discrepancies between Worley and its Customer's requirements. Keep up-to-date with the latest developments and technical innovations in electrical engineering. If required, assist and support junior personnel within the electrical engineering team. Communicate effectively with the electrical engineering team and project stakeholders, including the Customer. Identify issues and problems, develop appropriate solutions, and ask for assistance when required.<br>Quality Assurance<br><br>Responsible for working within the provisions and guidelines of Quality Assurance systems.<br><br>Safety<br><br>Responsible for personal safety safe, safe working practices. Understand and follow OH & S procedures promoting health, safety and environmental awareness.<br><br>HSE Capability<br><br>Maintain HSE focus with the team to ensure OHSE requirements. Demonstrate business practices commensurate with a culture of world’s best health, safety and environmental performance. Demonstrate a visible and active commitment to:personal well-being;healthy and safe workplaces and activities; and Continuously improve Worley health, safety and environmental performance. Identify and report work hazards and incidents.<br>Education – Qualifications, Accreditation, Training<br><br>Full-Time Bachelor’s Degree in Electrical Engineering from an accredited university. MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage<br><br>Industry Specific Experience<br><br>Must have vast experience in Electrical design and engineering of oil & gas / large industrial projects in Onshore projects. Experience in brown fields & asset services type project / contracts. Experience in MV cable sizing based on IEC60287 using CYMECAP will be an added advantage. Qatar project experience with knowledge of Kahramaa standards is preferred.132k V GIS substation design132k V, 33k V Cable sizing calculation16MW to 20MW compressor motor Power System Study. Unit and non-unit protection setting. HV/LV Equipment Specification, Data Sheet. MR/TBE. Vendor Drawing Review. Sound Report Writing skills. Prepare Design Basis Memorandum for the project. Feasibility and Concept Optimalization Study, Pre-FEED, FEED, Detail Engineering Design.<br>Moving forward together<br><br>We’re committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by law.<br><br>We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation.<br><br>And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology.<br><br>Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change.

<p>To work as a Mechanical Engineer at project site. Develop and design mechanical systems and components for oil and gas operations, including pipelines, compressors, pumps, heat exchangers, and pressure vessels. Use engineering software to model, analyze, and simulate mechanical systems and components to predict performance and identify potential issues. Supervise and oversee the installation of mechanical systems and equipment, ensuring they are installed according to design specifications and safety standards. Ensure all mechanical systems and operations comply with industry regulations, safety standards, and environmental requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 07 years of experience. Good command over english language.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Description:</p><p>To work as a Piping Foreman at project site.</p><p>Knowledge &amp; Qualification:</p><p>Technical or vocational certification in Mechanical Engineering.</p><p>Preferably Ex-Daewoo.</p><p>Proven experience of 06 years in constructions, specifically in fertilizer or petrochemical process projects.</p><p>Role &amp; Responsibilities:</p><p>Oversee and supervise the daily activities of the piping crew on-site.</p><p>Coordinate with project managers, engineers, and other foremen to ensure smooth workflow and integration of piping work with other construction activities.</p><p>Ensure all piping work meets quality standards, codes, and safety regulations.</p><p>Inspect materials and equipment for compliance with project requirements.</p><p>Conduct inspections of piping installation to ensure alignment, fit-up, and weld quality.</p><div><br></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Technical or vocational certification in Mechanical Engineering.</li><li>Preferably Ex-Daewoo.</li><li>Proven experience of 06 years in constructions, specifically in fertilizer or petrochemical process projects.</li><li>Oversee and supervise the daily activities of the piping crew on-site.</li><li>Coordinate with project managers, engineers, and other foremen to ensure smooth workflow and integration of piping work with other construction activities.</li><li>Ensure all piping work meets quality standards, codes, and safety regulations.</li><li>Inspect materials and equipment for compliance with project requirements.</li><li>Conduct inspections of piping installation to ensure alignment, fit-up, and weld quality.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Management Systems</p> <ul> <li>Awareness of COMPANY Integrated Management Systems (Quality; Environment; Occupational Health &amp; Safety; Responsible Care; &amp; Energy Management Systems; and IFA Product Stewardship)</li> <li>Comply with all the relevant policies and procedures of COMPANY Integrated Management Systems.</li> </ul> <p>COMPANY Strategy</p> <ul> <li>Awareness of COMPANY's Vision, Mission, Strategic Map &amp; Core Values.</li> </ul> <p>Competency Management Framework Implementation:</p> <ul> <li>Support the roll out and ongoing application of the Competency Management Framework across the organization.</li> <li>Ensure alignment of competency practices with organizational and functional requirements.</li> <li>Provide guidance to stakeholders on framework application and interpretation.</li> </ul> <p>Job Competency Development and Implementation:</p> <ul> <li>Develop and document job-specific technical competency models in collaboration with functional teams.</li> <li>Review and update competency models as roles and/or business needs evolve.</li> <li>Ensure consistency and standardization of competency definitions and proficiency levels.</li> <li>Maintain a centralized repository of approved competency models.</li> </ul> <p>Technical Competency Assessment Oversight:</p> <ul> <li>Plan, coordinate and monitor the technical competency assessment cycle.</li> <li>Ensure assessments are conducted in line with the approved methodologies and timelines.</li> <li>Serve as an assessor and/or moderator to validate assessment outcomes.</li> <li>Provide guidance and support to assessors (from functional departments) to ensure assessment quality and objectivity.</li> </ul> <p>Competency Data Analysis &amp; Reporting:</p> <ul> <li>Analyze competency assessment results to identify gaps, strengths, and development priorities.</li> <li>Prepare competency assessment reports for functional leaders.</li> <li>Track competency trends and progress to guide the capability development requirements.</li> <li>Ensure data accuracy and integrity in competency records.</li> </ul> <p>Functional Learning &amp; Development Planning:</p> <ul> <li>Translate competency gaps into clear learning and development recommendations.</li> <li>Provide inputs to functional learning plans and capability development initiatives.</li> <li>Support the prioritization of technical training interventions based on assessment outcomes.</li> </ul> <p>Technical Competency Advisory &amp; Support:</p> <ul> <li>Act as the "go-to" person for technical competency-related queries and guidance.</li> <li>Support functions in interpreting assessment results and competency requirements.</li> <li>Promote best practices in competency assessments and capability development.</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul> <li>Bachelor's degree (preferably in Human Resources or related fields) from a recognized University.</li> <li>Professional certification (e.g., CIPD, SHRM, or equivalent) is desirable.</li> <li>Certified Workplace Assessor or Moderator certification.</li> <li>At least 5 years' experience in Learning and Development, Talent Management or Organization Development, including hands-on work with competency frameworks.</li> <li>Experience in competency management, capability development or technical training design.</li> <li>Solid understanding of learning and development practices - needs analysis, instructional design, evaluation of training effectiveness, and learning pathways.</li> </ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We currently have an opportunity within SPIE Global Services Energy Middle East LLC Doha, Qatar for a :<br></p><p><strong>Capability Development Supervisor</strong></p><p><strong>Key Responsibilities</strong></p><ul><li>Support the rollout and ongoing application of the Competency Management Framework organisation-wide. Ensure alignment with functional requirements and provide guidance to stakeholders on framework interpretation and application.</li><li>Develop and document job-specific technical competency models in collaboration with functional teams. Review and update models as roles or business needs evolve. Maintain standardised proficiency level definitions and a centralised repository of approved competency models.</li><li>Plan, coordinate, and monitor the technical competency assessment cycle. Ensure assessments comply with approved methodologies and timelines. Act as assessor and/or moderator; guide and support departmental assessors to ensure quality and objectivity of outcomes.</li><li>Analyse assessment results to identify gaps, strengths, and development priorities. Prepare competency reports for functional leaders; track trends and progress to inform capability planning. Ensure data accuracy and integrity across all competency records.</li><li>Translate competency gaps into actionable L&amp;D recommendations. Provide structured inputs to functional learning plans and support prioritisation of technical training interventions based on assessment outcomes.</li><li>Serve as the primary reference point for technical competency queries. Support functions in interpreting results and requirements. Promote best practices in competency assessment and capability development across the organisation.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Education &amp; Experience</strong> Bachelor's degree in Human Resources or a related field mandatory. Professional certification (CIPD, SHRM, or equivalent) desirable. Certified Workplace Assessor or Moderator required. Minimum 5 years of experience in Learning &amp; Development, Talent Management, or Organisational Development with direct, hands-on involvement in competency frameworks. Demonstrated experience in competency management, capability development, or technical training design.</p><p><strong>Technical Competencies</strong> Design, implementation, and maintenance of competency management frameworks and job competency models. Technical competency assessment planning, execution, moderation, and validation. Instructional design, learning needs analysis, training effectiveness evaluation, and learning pathway development. Data analysis and reporting on competency metrics. Familiarity with Client Integrated Management Systems (Quality, HSE, Environment, Energy, Responsible Care).</p><p><strong>Behavioural Competencies</strong> Structured and methodical; able to manage multiple competency assessment cycles simultaneously. Credible subject matter advisor communicates complex competency requirements clearly to functional stakeholders. Detail-oriented with high standards for data accuracy and consistency. Collaborative, with the ability to engage and guide assessors across diverse technical departments. Committed to continuous improvement and organisational capability growth.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <ul> <li>Monitoring activities within project sites (onshore &amp; offshore) and conducting daily/weekly HSE inspections/checks and ensuring the work being carried out are in line with approved JSA/JHA, Risk Assessment, Method Statement, and approved Permit to Work System.</li> <li>Identifying and implementing hazards/risk reduction measures in all areas and phases of contracts.</li> </ul><br><ul> <li>Participation and review method statements, Job Safety Analysis (JSA), safety third party certifications (lifting equipment, lifting plans, working at height etc.) and other HSE documents submitted by Contractors. Take necessary action by highlighting and reporting to immediate Supervisor in case of any lapse and/or deficiency.</li> <li>To provide, with full responsibility and accountability, a technical service to Corporation in the areas of Health and Safety during EPIC stage to ensure contractor(s) compliance with HSE plan, HSE risk register, policies, procedures, and regulations.</li> <li>Carries out duties and responsibilities for all areas of work covered in HSE aspects of Major Projects.</li> <li>Ensures adherence by contractor personnel to HSE policies, procedures and regulations with respect to active / passive fire safety systems, special protection systems, life safety and fire risk assessment, safety studies / reviews, security systems, emergency response programs, emergency lighting and communication systems. etc.</li> <li>Responsible for monitoring related activities within project sites and conducting daily inspection and ensuring the work being carried out is in line with approved JSA, Risk Assessment, and Method Statement and approved Permit to Work System.</li> <li>Responsible for identifying and implementing risk reduction measures in all areas and phases of construction.</li> <li>Participate and assist in checking and reviewing method statements, JSA's, safety certifications and other related documents submitted by contractors/ project consultants.</li> <li>To take necessary action by highlighting and reporting to immediate Supervisor in case of any lapse and/or lagging.</li> <li>Participate and provide input to Sr. HSE Engineer for the implementation of Project HSE Performance Monitoring, HSE Objectives and Initiatives, HSE related procedures, guidelines, standards and policies to ensure Project activities are conducted in a safe, secure and healthy manner and in compliance with DT HSE and Corporate requirements.</li> <li>Monitor implementation of HSE Legal requirements, regulatory bodies, national laws and regulations, and State of Qatar-ratified international conventions and protocols within Project activities.</li> <li>Participate and provide support to carry out and maintain records of Project HSE risk register to ensure proper recording, monitoring and close-out of Project HSE Risks throughout project duration.</li> <li>Participate in review of contractors' HSE documentation (HSE Plan, HSE Procedures and other HSE requirements) to ensure contractors are compliant with HSE requirements.</li> <li>Participate in review of contractor's Safety Officers CV's and competence assessment test/ personal interview prior to mobilization of contractors HSE personnel at project site to ensure compliance with Corporate HSE Regulations for contractors.</li> <li>Carry out incident investigation, reporting including implementation of close-out of preventive and corrective actions of incidents/accidents that occur within projects to ensure compliance with corporate procedure for Incident management.</li> <li>Conduct site safety meetings and HSE awareness amongst project staff and Contractors.</li> <li>Conducts safety audits on the project involving all parties to ensure compliance with safety policies and advise corrective actions and follow-up on the suggested actions to ensure proper implementation</li> </ul><br><ul> <li>Minimum 12 years' experience in project or operational safety (onshore/offshore), or at offshore oil &amp; gas, petrochemical projects, specifically experience in offshore/onshore fabrication yards, working at offshore platforms, barges and experience working at offshore construction and installation projects.</li> <li>Thorough knowledge on various safety, health and environmental regulations, standards, procedures and environmental compliances during offshore construction/installation and in-depth knowledge and experience in HSE management system of the company, contractors/sub-contractors.</li> <li>Excellent communication and competency in the use of PC including MS office and any other relevant software.</li> <li>Experience in the Arabian Gulf is desirable.</li> <li>HNC/B.Sc. or equivalent in engineering discipline. Safety course (NEBOSH or equivalent or higher (safety Diploma) and preferable associate member of recognized safety institution.</li> <li>Offshore training TBOSIET &amp; H2S (OPITO approved), PTW, JSA and incident investigation, ISO 45001 and lead auditor training is desirable.</li> </ul><br><ul> <li><strong>Salary:</strong><ul> <li>Day Rate in QAR Plus Allowance</li> </ul></li> <li><strong>Work Schedule:</strong><ul> <li>8 Hours / 5 Days</li> </ul></li> </ul> <ul> <li><strong>Duration:</strong> <ul> <li>2 years, renewable</li> </ul> </li> <li><strong>Location:</strong> <ul> <li>Qatar</li> </ul> </li> </ul> </div>

<p>Supervise and monitor civil maintenance and construction works, ensuring proper progress, quality and compliance with site requirements. Review method statements, JHA, drawings and documents, and arrange necessary work permits. Conduct site visits, inspections and record as-built measurements and actual work completed. Monitor contractor activities, work progress, materials, equipment and manpower usage. Supervise civil maintenance, demolition, alteration and modification works during routine and shutdown activities. Maintain inspection records and ensure works comply with approved specifications, quality and safety requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>Diploma in Civil Engineering with relevant Oil &amp; Gas experience in civil maintenance and construction supervision. Good knowledge of drawings, QA/QC, safety procedures and computer applications is required.</p>

<ul><li><p>Overall Managment of HSE Issues, Waste Management Issues, all required Liaison activities</p></li><li><p>with all concerned etc.</p></li><li><p>Well versed with Local/National/International rules/regulations/guidelines governing</p></li><li><p>Environmental Procetions/Safety.</p></li><li><p>Ensure Environment/Safety Awarness to all Contractor staff and Shall Coordinate with</p></li><li><p>QatarEnergy for all HSE related Training for its staff</p></li><li><p>Liaise with QatarEnergy HSE Dept for all Safety/Environment related matters</p></li><li><p>Ensure that all activities carreid out are in line with QatarEnergy</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>10+ minimum 12 yrs exp as a HSE professional & 8 yrs exp in mgmt of HSE for TA in Oil/Gas industries.</p></li><li><p>10 years of experience in Turnaround/ shutdown projects </p></li><li><p>Fully fluent in English</p></li></ul>

<p>Assist the deck foreman in all deck activities including housekeeping/washing, with a focus on rigging and lifting operations, and offload/backload cargo on all Company offshore platforms to ensure their safe and efficient operation and performance. Support the maintenance, inspection and operational activities on the platforms in compliance with safety standards and regulatory requirements.</p><p>Reports to Production Foreman/Deck Foreman. Direct reports: None. Internal Liaise with Radio Operator, Offshore Medic, various offshore dept. teams and disciplined Supervisors, Onshore Logistic Co-ordinator. External Third-party contractor representatives and vessel and helicopter captains and crews.</p><p>Implement and provide support for (1) safe and efficient deck crew services to multiple user departments; (2) offshore Crane Operator performance and procedural compliance; (3) helicopter deck operations, including refuelling and in-field shuttle coordination ; (4) infield personnel, material and cargo transfer to support O&amp;M campaigns on multiple remote wellhead platforms. Emergency Response team member duties, as assigned. Work 28/28 rotation, working 12-hour shifts. Support 24-hour crane and helideck coverage on as need basis.</p><p>As defined for this job level in the Delegation of Authority and/or approved budget.</p><p>Ensure all activities are undertaken in compliance with Company Safety, Health and Environment and Quality policies, regulations and standards.</p><p>Contribute to the development of Qatari employees. This accountability is a condition of employment for expatriate employees.</p><p>Ensure all activities undertaken comply with anti trust and competition laws and the Company firewall policies and procedures.</p><p>Execute deck crew operations with cargo and equipment movements, backload/offload including equipment and material distribution on the main complex and on remote platforms, including compliance to permit to work system. Prepare interfiled material movement cargo manifests for all the items loaded from remote well head platforms. Provide technical support to infield crane operations and general inspections on all platforms to ensure compliance with company procedures and policies, including crane logbook entry compliance. Assist with infield supervision of any Personnel Basket Transfer by crane, due to restrictive conditions. Perform tasks on cranes including repositioning crane arm, lowering or lifting pulley, testing equipment etc., as instructed in providing support to the maintenance or safety crew. Provide rigging services and ensure waste segregation and general deck housekeeping services are completed including washing of platforms and bridges, including assisting scaffolding teams. Assist the maintenance and inspection team during process vessel entry activities (confined space), ensuring thorough internal cleaning is conducted under breathing apparatus (BA) system.</p><p>Provide helideck operations services, supporting and implementing the duties as a certified Helicopter Landing Officer (HLO), during landing, take-off and emergency events on the helideck in compliance with international standards and procedure as prescribed by the local Aviation Authority. Provide helicopter re-fuel services including related fuel storage, sampling logging and fuel skid certification requirements. Assist the foreman in maintaining records of all certified lifting gear available on each platform, ensuring compliance with all requirements for inspection and recertification activities. Implement daily routine lifting plans, as required in the company s lifting procedure including maintaining consumable item stock levels on all decks. Coordinate and assist the safe movement of hazardous good to and from the platforms in line with International Dangerous Goods (IMDG) regulations. Perform duties as part of the Emergency Response Team (ERT), responding during emergencies as assigned including familiarity to casualty transfer by boat and helicopters. Attend and participate all mandatory training in accordance with Company requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>Completion of Secondary School followed by vocational training/credential (Higher National Diploma, HND) and certification as Helicopter Landing Officer, Offshore Crane Operator and Scaffolding &amp; Rigging at supervisor level.</p><p>3 years experience within the oil and gas sector, in an offshore environment as crane operator or in helideck operations as an HLO .</p><p>Good knowledge of written and spoken English. Computer Literacy (MS Office). Adaptability to work in a multicultural team environment under challenging conditions.</p>

<p>Supervise and approve construction activities and co-ordinate various aspects of project construction including inspections, material submissions and working drawings from contractors, and processing documentation as required. Carry out daily checks on contractor's staff and work carried out during the previous day in order to ensure compliance with prescribed contractual specifications. Handle all aspects of Electrical/Instrument Construction activities including site investigations, site surveys and etc. Supervise and manage installation Earthing and Lightning Protection works. Supervise installation of Lighting and Small Power works. Manage and supervise cable tray installation and Fire Alarm System cable laying and termination works. Co-ordination of finalizing Cable entries, cable routes, cable diversions etc. Manage and supervise cable tray installation and Instrument Control &amp; Power Cable laying and termination works. Supervise Fiber Optic cable installation and splicing works. Supervise installation of Fire Alarm Control Panels, Repeater Panels and Mimic Panels. Supervise installation of Control junction boxes and Panels. Good knowledge in reading and understanding Equipment Layout drawings. Overall coordination with Mechanical works, HVAC works, Fire alarm &amp; Loss prevention system works, Building Services works and etc. Cable termination and Loop checking. Co-ordinate pre-commissioning activities and assist during commissioning of facilities. Initiate Mechanical Completion Certificates (MCC), Hand Over Certificate (HOC), Acceptance Certificate (AC), and facilitate the issuance of Project Completion &amp; Discharge Certificates. Witness SAT pre commissioning activities for equipment. Maintain a daily record of progress (daily diary) noting special comments. Reports to supervisor work anomalies or contractual deviations committed by contractor personnel and recommend corrective actions. Sign work permits on behalf of Company and to ensure that contractor's compliance with work permits. Participate in development of as-built drawings/documentation. Prepare Punch list for finished work prior to handing over to Company by contractor by paying special attention to all EHV equipment including Quality checks. Works closely with other Company Construction Supervisors (Mech / Elec). Report to Company Senior Construction Supervisor on main issues, events at site, progress reporting, trends and recommendations for improvement. Accountable for supervising contractor's work that is in progress, inspecting work, reporting problems and preventing accidents occurring as a result of negligence, by enforcing Company safety standards on the work site. Liaise and report with the QC Inspector on quality related matters. Liaise with the HSE Supervisor on safety related matters. Inspect construction works and materials in accordance with project quality plans and inspection &amp; test plans (ITPs). Co-ordinate with concerned and End User parties to resolve site issues and refer technical queries to senior construction supervisor and project engineer. Review contractors' construction plans and schedules including method statements and JSAs.</p><p><strong>Desired Candidate Profile</strong></p><p>Candidate must possess a Degree from recognized University or Diploma in Instrumentation or Electrical/Electronics Engineering with extensive construction related experience.</p><p>Good skills in construction management, effective communication, conflict resolution. Relevant courses in HSE, QAQC and construction.</p><p>Candidate should have a minimum of 15 years overall E&amp;I experience in Construction installation pre-commissioning &amp; commissioning oil and gas industries including largescale solar projects or similar nature projects.</p><p>Extensive experience in large scale solar (Photovoltaic) Projects.</p><p>The construction supervisor should have a strong technical background in Instrumentation &amp; Control systems, including knowledge of sensors, transmitters, controllers, PLCs (Programmable Logic Controllers) &amp; SCADA (Supervisory Control and Data Acquisition).</p><p>This includes understanding safety standards, hazardous area classifications, and compliance with relevant codes and regulations.</p><p>Experience in construction project management is important for overseeing the installation, testing, and commissioning of Instrumentation &amp; Control systems within the project timeline.</p><p>Should have the ability to interpret engineering drawings, P&amp;IDs (Piping and Instrumentation Diagrams), and control system layouts to ensure accurate implementation of the designed systems.</p>

<p>Witness and review Concrete Trial Mix Designs to verify compliance with project specifications, strength requirements, workability, durability, and performance criteria</p><p>Perform inspections of excavation, backfilling, compaction, foundations, concrete works, reinforcement installation, formwork, embedded items, anchor bolts, concrete placement, curing, and finishing activities</p><p>Inspect equipment foundations, machine foundations, transformer foundations, structural pedestals, and associated concrete works to ensure compliance with approved drawings and tolerances</p><p>Conduct inspection and testing of grouting works, including non-shrink grout installation beneath equipment bases, structural supports, and foundations</p><p>Inspect passive fireproofing works for structural steel and equipment supports, ensuring compliance with approved specifications and manufacturer requirements</p><p>Verify material receiving inspections, material sampling, testing, storage conditions, and compliance with approved Material Approval Requests (MAR) and project requirements</p><p>Witness field and laboratory testing activities, including soil compaction tests, field density tests, concrete slump tests, compressive strength tests, aggregate testing, asphalt testing, and other required quality tests</p><p>Conduct inspections of road works, including subgrade preparation, sub-base, road base, prime coat, tack coat, asphalt paving, compaction, thickness verification, level surveys, and pavement testing</p><p>Perform inspections of building construction activities, including blockwork, masonry, plastering, waterproofing, screeding, flooring, ceiling installation, architectural finishes, and building painting works</p><p>Inspect pipeline trench excavation, trench preparation, bedding installation, pipe lowering activities, initial backfilling, padding, post-padding, and final backfilling works</p><p>Conduct Right-of-Way (ROW) inspections to verify compliance with alignment, grading, environmental requirements, and project specifications</p><p>Inspect pipeline crossings, including road crossings, utility crossings, railway crossings, wadi crossings, and associated protection systems</p><p>Perform inspections of culverts, drainage systems, retaining structures, channels, and related civil infrastructure works</p><p>Inspect construction of pipeline bund walls, storage tank dyke walls, containment systems, and associated concrete and earthworks</p><p>Conduct inspection and verification of GRE (Glass Reinforced Epoxy) piping installation, leak testing activities</p><p>Perform inspections of HDPE piping installation, welding activities, visual inspection, pressure testing, and commissioning requirements</p><p>Inspect structural steel fabrication and erection activities, including alignment, leveling, bolt tightening, welding, and installation tolerances</p><p>Review material delivery documents, mill certificates, test reports, calibration certificates, and inspection records to ensure compliance with project requirements</p><p>Verify that approved materials are properly handled, stored, preserved, and utilized in accordance with project specifications</p><p>Coordinate with construction teams, engineering disciplines, clients, consultants, and contractors for inspection scheduling, hold points, witness points, and quality surveillance activities</p><p>Review and maintain inspection reports, quality records, surveillance reports, punch lists, and turnover dossiers in accordance with project quality requirements</p><p>Identify non-conformities, raise NCRs, quality observations, and corrective action requests, and monitor implementation through closure</p><p>Monitor contractor and subcontractor compliance with approved Quality Management Systems, Quality Plans, Procedures, and Project Specifications</p><p>Support implementation of Project Quality Management Systems and ensure compliance with applicable HSE requirements throughout all construction phases</p><p><strong>Desired Candidate Profile</strong></p><p>Civil/Structural/Architectural/Geological or equivalent degree and/or diploma with experience in quality Control in multi-discipline construction environment. Preferably having formal training in QC and membership with recognized or other professional institutions</p><p>Minimum 10 years of experience for Bachelor's degree holders or 15 years for Diploma holders in Quality Control Inspection of Civil, Structural, Architectural, and Pipeline construction activities, preferably within Oil &amp; Gas, Petrochemical, Industrial, Infrastructure, and EPC projects</p><p>Extensive experience in inspection, testing, and quality assurance of civil and pipeline construction works, including concrete works, road works, building construction, underground utilities, storage tanks, and related infrastructure</p><p>Proven expertise in Batch Plant Prequalification Audits, Concrete Trial Mix Design Witnessing, material approval processes, field inspection, and quality documentation.</p><p>Strong knowledge of international codes, standards, and specifications, including QCS, ACI, ASTM, AASHTO, API, ASME, BS, ISO, and project-specific requirements</p><p>Demonstrated capability to work effectively within multidisciplinary and multicultural environments, coordinating with clients, consultants, contractors, subcontractors, and third-party inspection agencies</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p><span><span>The Rig Manager leads the day-to-day management of rig operations and personnel, ensuring safe, efficient, and compliant drilling activities. The role is responsible for supervising rig crews, maintaining operational readiness, and coordinating closely with drilling and maintenance teams to meet project objectives.</span></span></p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p><span><span><span>Manage daily rig operations, including drilling, maintenance, and safety compliance.</span></span></span></p><br> <p><span><span><span>Supervise and lead rig personnel to ensure high levels of performance and safety awareness.</span></span></span></p><br> <p><span><span><span>Coordinate rig mobilization, rig-up, and rig-down activities as required.</span></span></span></p><br> <p><span><span><span>Enforce adherence to HSE policies, well control procedures, and industry standards.</span></span></span></p><br> <p><span><span><span>Monitor rig equipment performance and oversee routine maintenance activities.</span></span></span></p><br> <p><span><span><span>Liaise with drilling supervisors, engineers, and contractors for operational alignment.</span></span></span></p><br> <p><span><span><span>Conduct regular safety meetings, inspections, and incident investigations.</span></span></span></p><br> <p><span><span><span>Manage rig inventory and ensure availability of necessary tools and spare parts.</span></span></span></p><br> <p><span><span><span>Report rig activities, incidents, and operational status accurately and timely.</span></span></span></p><br> <p><span><span>Identify and resolve operational issues promptly, escalating critical matters as needed.</span></span></p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p><span><span><span>Strong knowledge of rig systems, drilling operations, and well control practices.</span></span></span></p><br> <p><span><span><span>Effective leadership and team management skills.</span></span></span></p><br> <p><span><span><span>Solid understanding of HSE requirements and safety culture enforcement.</span></span></span></p><br> <p><span><span><span>Good communication and problem-solving skills in a fast-paced environment.</span></span></span></p><br> <p><span><span>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role (this point to be available for all roles that have SAP access)</span></span></p><br> <br><br><u><b>Job Experience</b></u> <br><p><span><span><span>Minimum 8 years working experience, 5 years in a relevant supervisory position, 2 years GCC experience is a plus</span></span></span></p><br> <br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Asset Management L4<br>Build High-Performing Teams<br>Drilling Engineering L4<br>Leadership<br>Logistics &amp; Transportation Management L4<br>Provide Direction<br>Quality<br>Regulatory Compliance &amp; Safety Standards L4<br>Resilience<br>Safety Management L4<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Engineering or any related field<br>Certificate in any Related Technical Certificates or any related field<br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Digital Office Manager holds a pivotal role in steering the organization's digital evolution. As the strategic leader overseeing digital initiatives, you will be at the forefront of innovation, responsible for driving the entire lifecycle of digital projects, from conception to realization.</p><br><p>The Digital Office Manager reporting directly to the Chief Technical Officer (CTO) and collaborate closely with key stakeholders across the business to understand the intricacies of operational challenges. The primary focus will be on identifying emerging technologies and cutting-edge processes and orchestrating their seamless integration into our business operations.</p><br><p>The Digital Office Manager will serve as the connection between conceptualizing transformative ideas and executing practical solutions. The mission is not only to keep a vigilant eye on the technological landscape but also to align these advancements with our organizational goals. By leveraging your expertise, the role holder will contribute to the development and implementation of innovative strategies that drive our digital transformation agenda forward.</p><br><p>The role demands a visionary mindset and a proactive approach to problem-solving. The Digital Office Manager will be instrumental in shaping and executing our digital strategy, ensuring that each digital engagement is finely tuned to meet our business objectives. The impact will extend beyond traditional boundaries by guiding the team in harnessing the power of digital technologies to address complex challenges and optimize operational efficiency.</p><p><br></p><p>Key Accountabilities:</p><p><br></p><ul><li><p>To ensure interpreting the digital strategy and to identify innovative solutions supporting strategy implementation.</p></li><li><p>Drive QAFCO's digital vision and strategy definition, acting as the steward for the digital initiatives' roadmap across the organization.</p></li><li><p>Identify and ideate digital business opportunities across the value chain, based on strategic and operational challenges or threats observed within the organization.</p></li><li><p>Oversee the development of an integrated digital budget and spend plan across relevant QAFCO functions, ensuring alignment with strategic objectives.</p></li><li><p>Identify synergies for developing and implementing digital solutions, collaborating with respective owners to ensure cohesive integration.</p></li><li><p>Review digital value realization (i.e., ROI) across functions, ensuring that digital investments align with business objectives and deliver tangible outcomes.</p></li><li><p>Develop relevant digital expertise through a Center of Excellence model, tailored to meet evolving business needs and technological advancements.</p></li><li><p>Oversee the digital use case lifecycle delivery, from design and prototyping to full-scale roll-out, ensuring seamless execution and integration into existing processes.</p></li><li><p>Lead and oversee the development of sustainable partnerships with local and global innovation ecosystems, fostering collaboration and driving digital innovation within QAFCO.</p></li><li><p>Act as the single point of contact and key advisor to relevant QAFCO executives for digital topics and the future of the business, providing strategic guidance and insights.</p></li><li><p>Act as the face of QAFCO in local and global digital and innovation events, seminars, and associations, representing the organization and fostering relationships with key stakeholders in the digital ecosystem.</p></li><li><p>Interpret the digital strategy and identify innovative solutions supporting strategy implementation. Manage and evaluate the portfolio/pipeline of innovative ideas collected from across the company.</p></li><li><p>Work closely with relevant business stakeholders to understand operational challenges or threats. Lead teams to build and implement digital products, tracking implementation progress and ensuring alignment with business and IT.</p></li><li><p>Monitor the implementation of the digital strategy and roadmap, identifying risks, issues, and challenges, and seeking mitigation measures.</p></li><li><p>Lead the ideation program to identify digital opportunities, ensuring compliance with relevant quality, health, safety, and environmental management procedures and controls.</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor’s Degree in relevant field.</p></li><li><p>Minimum of 10 years of relevant professional experience in digital implementation, innovation, or a related field, with minimum 5 years in a managerial role, preferably within the Oil &amp; Gas or Petrochemical Industry.</p></li><li><p>Certifications in project management, such as PMP (Project Management Professional) would be added as an advantage.<br> </p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>On assigned shift carries out a variety of duties to maintain the efficient and safe running of NGL-l/2/3 and 4 process plants, auxiliary units, storage facilities, ship loading from NGL jetty and supplies to QAPCO and QP Refinery. Includes starting up and shutting down plant following set procedures, commissioning equipment, Plant Unit wise, Rotating equipment and Plant equipment, Commissioning Pig Traps for receiving and Launching Pigs by-passing pig traps for opening and cleaning, checking that working conditions are safe for maintenance to be carried out and carrying out various duties related to ship loading.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>4 years experience in Hydrocarbon Processing Plant.</li><li>Completion of Secondary school plus I year full time training in plant operations to C &amp; G or equivalent standard.</li><li>Good level of spoken and fair level of written English.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><strong>Key Responsibilities:</strong></p><ul> <li>Support the design and delivery of building services across industrial and infrastructure projects.</li> <li>Lead the development of safe, compliant, and cost-effective engineering solutions in accordance with international standards such as NFPA, ASHRAE, and local regulations.</li> </ul><p><strong>Engineering Design &amp; Technical</strong></p><ul> <li>Lead the design and development of:<ul> <li>Fire protection systems (hydrants, sprinklers, foam, clean agent systems)</li> <li>Domestic water supply systems (potable and non-potable)</li> <li>Drainage systems (sanitary, stormwater, oily water, condensate)</li> </ul></li> <li>Perform system calculations, including:<ul> <li>Firewater demand and hydraulic calculations</li> <li>Pipe sizing and system design optimization</li> </ul></li> <li>Prepare engineering deliverables:<ul> <li>Design basis reports, calculations, and specifications</li> <li>System schematics, layouts, and detailed drawings</li> <li>Equipment datasheets and technical documentation</li> </ul></li> </ul><p><strong>Fire Protection Engineering</strong></p><ul> <li>Design and review:<ul> <li>Firewater networks (pumps, storage, distribution)</li> <li>Sprinkler, water spray, hydrant, and hose reel systems</li> </ul></li> <li>Ensure compliance with NFPA standards and local civil defense requirements</li> <li>Develop fire protection philosophies, layouts, and system calculations</li> </ul><p><strong>Plumbing &amp; Drainage Systems</strong></p><ul> <li>Design complete plumbing systems, including:<ul> <li>Domestic cold and hot water systems</li> <li>Utility water supply for maintenance and operational use</li> </ul></li> <li>Design and coordinate drainage systems:<ul> <li>Sanitary drainage</li> <li>Stormwater systems and discharge arrangements</li> </ul></li> <li>Interface with external utilities for water supply and drainage tie-ins</li> </ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p> Full-Time Bachelor's Degree in Mechanical Engineering from an accredited university </p><p> MME (Ministry of Municipality and Environment) engineering accreditation is a mandatory requirement. Candidates not holding this accreditation must be willing to achieve this within the probationary period. </p><p> Chartered Professional Engineer (CPEng) status or undertaking the same will be an advantage </p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong> Hiring: Cost Control Specialist | Doha, Qatar</strong><br> Join a major EPC project in Qatar and play a key role in cost estimation, change order management, forecasting, and project controls throughout the EPC phase.<br> <strong>Location:</strong> Doha, Qatar<br> <strong>Contract Type:</strong> Long-Term Contract<br> ️ <strong>Work Schedule:</strong> 100% Onshore<br> <strong>Rotation:</strong> 12 Weeks ON / 2 Weeks OFF<br> <strong>Working Days:</strong> 6 Days per Week<br> ⏰ <strong>Working Hours:</strong> 8-10 Hours per Day<br> <strong>Job Purpose</strong><br> The Cost Control Specialist will lead change order cost estimation, negotiation, forecasting, and reporting activities throughout the EPC project lifecycle. The role is responsible for ensuring project cost estimates remain accurate, up to date, and aligned with project schedules while supporting effective project controls and change management processes.<br> <strong>Key Responsibilities</strong><br> ✅ Lead cost estimation, cost control, and change order management activities.<br> ✅ Review and validate contractor estimates to ensure contractual compliance.<br> ✅ Develop Company estimates and maintain auditable documentation trails.<br> ✅ Monitor EPC contractor performance in cost control, progress measurement, and schedule control.<br> ✅ Coordinate project cost forecasting, schedule analysis, and reporting.<br> ✅ Support development of Class III Cost Estimates and bid check estimates.<br> ✅ Assess cost and schedule impacts of proposed project changes.<br> ✅ Prepare monthly cost reports and analyze project control trends.<br> ✅ Participate in contracting strategy workshops by developing cost/schedule-driven scenarios.<br> ✅ Negotiate change orders on behalf of the Company throughout EPC contract execution.<br> <strong>Requirements</strong><br> <strong>Education</strong><ul><li>Bachelor's Degree in Engineering, Accounting, Business Management/Administration, Commercial Discipline, or related field.</li></ul><strong>Experience</strong><ul><li>Minimum <strong>8 years of experience</strong> in cost estimating, scheduling, and project controls.</li><li>Strong experience validating contractor estimates and developing cost reports.</li><li>Experience working on <strong>Brownfield Projects</strong>.</li><li>Proven experience in EPC project environments.</li><li>Strong understanding of cost and schedule drivers, forecasting, and change management.</li></ul><strong>Skills</strong><ul><li>Excellent written and verbal English communication.</li><li>Strong analytical and negotiation skills.</li><li>Advanced proficiency in Microsoft Office and project control applications.</li></ul>Ability to manage multiple stakeholders and complex project changes.<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>