وظائف مبرمجين في ليبيا

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Open data is widely recognized as a foundational enabler of sustainable development because it improves evidence-based decision-making, transparency, and citizen participation. Timely, accessible, and shareable data supports human centered innovation, strengthens public service delivery, and enhances accountability in governance systems. In fact, open government data operationalizes transparency, a core principle of effective governance for achieving the 2030 Agenda, by making public sector information reusable for social and economic value creation. In this context, open data contributes directly to multiple SDGs, including institutional effectiveness (SDG 16), innovation (SDG 9), and partnerships (SDG 17). Globally, open data is transforming digital economies and governance systems by enabling innovation, improving policy design, and supporting data-driven ecosystems. Open data enhances democratic engagement and stimulates innovation by allowing businesses and citizens to reuse government data for new services and insights. At the same time, ITU data shows that the rapid expansion of digital connectivity with around 74% of the global population online in 2025 creates unprecedented opportunities for open data use, although gaps persist across regions. Regionally, particularly in developing and Arab countries, open data can help address structural challenges by improving coordination and reducing information asymmetries. However, disparities in infrastructure, governance maturity, and digital skills mean that the impact of open data varies significantly, requiring tailored policies and capacity-building interventions to unlock its full potential. One leading global example is the United Kingdom s data.gov.uk platform, which releases thousands of datasets across sectors such as transport, health, and the economy, enabling businesses to build data-driven services and enhancing government transparency. This demonstrates that when supported by policy frameworks and stakeholder engagement, open data can generate tangible economic and governance benefits in both advanced and developing contexts. For Libya, adopting a comprehensive open data policy is particularly critical given the country s challenges and limited availability of reliable data. An open data policy would help address these gaps by standardizing data collection and sharing, improving trust in public institutions, and enabling evidence-based reforms. The General Information Authority (GIA) in Libya requested the technical assistance of ESCWA to develop the national open data policy. The objective of this consultancy is to provide an advisory service to assist ESCWA team in suggesting the national open data policy to the GIA.</p><p>The consultant shall propose to the designated ESCWA focal point a detailed version of the open data policy. To produce the draft policy, the consultant is requested to conduct, among others, the main following tasks:</p><ol><li>Review the national digital documents and the existing policies and strategies in Libya related to digital transformation, innovation, digital technologies, and other related national development plans;</li><li>Review best regional and international best practices related to open data policies and frameworks (at least 2 selected regional and 2 international cases);</li><li>Identify main national stakeholders, hold, in coordination with GIA, interviews and meetings with the main national stakeholders and preparing minutes of each meeting/interview summarizing the discussed points, their remarks, observations and proposals;</li><li>Contribute to sectoral workshops to discuss needs and priorities, if needed;</li><li>Prepare the needed policy based on international and regional best practices, gap analysis, national needs (SWOT analysis);</li><li>Present the draft report in a national workshop or meeting (physically or remotely) and capture the main comments and findings of the discussions;</li><li>Update the draft proposal according to all received feedback and comments during the reviewing process by ESCWA and GIA.</li></ol><p>ESCWA promotes gender equality and integration of youth through its publications and therefore the consultant should pay attention, with the help of ESCWA staff, to gender considerations and youth dimension throughout the research work to ensure that the report gives equal attention to the needs of both men and women, as well as girls and boys. Writing should use gender-sensitive language.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications/special skills</h2><p>A Master's degree in ICT, technology, engineering, computer science or a related field is required. A Ph.D. degree is desired. All candidates must submit a copy of the required educational degree. Incomplete applications will not be reviewed. At least 5 years of professional experience and research in the domain of digital technologies is required. Previous experience in the delivery of research papers is desirable. Previous experience in the development of digital plans is desirable. Previous experience with open data policies and frameworks is desirable. Previous experience with open data policies and frameworks is desirable.</p><p>English and French are the working languages of the United Nations Secretariat; and Arabic is a working language of ESCWA. For this position, Fluency in written and spoken Arabic and English is required. Note: Fluency equals a rating of fluent in all four areas (speak, read, write, and understand) and Knowledge of equals a rating of confident in two of the four areas.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The ideal candidate should have strong experience in requirements gathering, stakeholder management, FRS preparation, process flows, project governance, and banking domain processes (Retail Banking, Customer Onboarding, Sales, and Customer Service). Hands-on knowledge of Siebel Configuration, Workflows, Integration Framework, and Open UI is required</p><p>Candidates must have expertise in Siebel Tools, eScript, Business Components, Business Services, Workflows, Open UI, Siebel EAI, Integration Framework, REST/SOAP Web Services, SQL, and Oracle Database. Experience in CRM implementation, migration, integration, and enhancement projects is preferred.</p><p>The candidate should have strong expertise in Functional Testing, SIT, Regression Testing, UAT, API Testing, Integration Testing, Test Case Preparation, Defect Tracking, and CRM business process testing. Banking domain experience and familiarity with test management tools are highly preferred.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Exp: 10+ years of experience in Oracle Siebel CRM implementations and end-to-end CRM project management.</p><p>Exp: 5+ years of hands-on experience in Oracle Siebel CRM Development.</p><p>Exp: 5+ years of experience in testing Oracle Siebel CRM applications.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div><b><span >Overview of position</span><span > </span></b></div><div><span >In January 2023, Our client launched its new three-year project on “Strengthening the rule of law and justice in Libya”, contributing to peace, stability, and an inclusive social contract for Libya. With targeted, country-wide activities, Our client contributes to increasing access to justice and the delivery or responsive and accountable justice and security services for all living in Libya. The project focuses on three outputs: i) continue to enhance the capacities of institutions to deliver justice services, ii) partner with local government actors to strengthen justice and fight impunity at the community/municipal level, and iii) support CSOs and universities in service delivery. The project is aligned with Our clients new country program and the UN Strategic Cooperation Development Framework (UNSCDF) 2023-2025 and invests in long-term partnerships and robust monitoring and evaluation to ensure sustainable results, prioritization of those most in need, and value for money.</span></div><div><span ><br></span></div><div><span >Our client conducts outcomes, portfolio and programme/project evaluations at different stages of the Country programme to capture and demonstrate evaluative evidence of Our client’s contributions to development results at the country level, as well as to programme-specific objectives and goals. To this end, Our client will carry out an independent final evaluation within the overall provisions contained in the Our client Evaluation Policy.</span></div><div><span ><br></span></div><div><span >&nbsp;The purpose of the final evaluation is (1) to assess the overall results and impact of the project and (2) to serve as an accountability for donors and stakeholders, including beneficiaries. The evaluationwill identify what has been working and what has not and the factors behind them. The evaluation will also draw lessons learned and best practices that may be considered for future programming. The evaluation findings and results will be disseminated to and shared with relevant stakeholders,including donors and government partners, and communicated to project beneficiaries.</span></div><div><span >The independent final evaluation will cover the beginning of the project up to the day of evaluation, August 2026. It will cover all project outputs, activities and processes including conceptualization, design, implementation, monitoring, reporting, and evaluation of results in consultation with all project stakeholders. The evaluation will focus on the support the project has been providing many different fronts on the Missing Persons file in Libya, from institutional strengthening and capacity building for relevant government officials to enabling an environment where rule of laws and human rights are upheld, while bringing justice and responsive services closer to the families of missing persons, as per the project document. The geographic location of the project covers the West, East and South of Libya. As the implementation progressed, the project focuses on two pilot areas, Tawergha and Tarhuna in the West. The scope of the evaluation is expected, but not limited to, to be in the areas&nbsp;</span></div><div><span ><br></span></div><div><span ><b>Role objectives<span > </span></b></span></div><div><span >The evaluation team is expected to deliver the following products:</span></div><div><span ><br></span></div><div><span ><br></span></div><div><span ><br></span></div><div><span >a. Evaluation Inception Report. An inception report is the result of preliminary discussion between the project team and the desk review of the relevant documents. The inception report must be produced before any further evaluation activities, such as interviews and field visits. The inception report should include an elaborated workplan of the evaluation process together with the timeline as accurate as possible. Also, an evaluation matrix that maps out all project stakeholders for data collection, the evaluation design and methodology to approach stakeholders including how cross cutting issues will be addressed, theory of change review. Please see ANNEX F for evaluation matrix template. The inception report should be between 10-15 pages.</span></div><div><span >&nbsp;</span></div><div><span ><br></span></div><div><span >b. Evaluation Debriefings. The evaluation team is expected to provide evaluation debriefing as required to the national counterparts (and other government partners if necessary), our client, donors, and other relevant stakeholders.</span></div><div><span >&nbsp;</span></div><div><span ><br></span></div><div><span >c. Draft Evaluation Report. Following the activities done by the evaluation team collecting data and evidence, a draft report is expected to be submitted to our clientand UNSMIL for comments and feedback. It should be between 40- 60 pages. Please refer to ANNEX G for the outline of the report. The draft report should comply with the our client quality requirements.</span></div><div><span >&nbsp;</span></div><div><span ><br></span></div><div><span >d. Evaluation Report Audit Trail. The project team and other relevant stakeholders are expected to provide comments on the draft evaluation report. The comments and feedback will be compiled in one document (audit trail) where the evaluation team is to address them. The response to the comments by the evaluation team must also be retained.</span></div><div><span >&nbsp;</span></div><div><br></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Key competencies - Demonstrated ethical standards with the ability to maintain impartiality during evaluation. - Demonstrates integrity and fairness by modelling UN values. - Demonstrates professional competence and is conscientious and efficient in meeting commitments, observing deadlines, and achieving results. - Excellent cultural, gender, age, and nationality sensitivity and ability to work with people from different backgrounds. - Ability to work with minimal supervision, taking own initiative and control to implement tasks - Ability to deal with multi-stakeholder groups - Excellent interpersonal and communication skills (written and verbal) - Strong analytical and reporting skills with the ability to conceptualize, articulate, and present (written and verbal) about rule of law, justice, and security within the development context. - Proven experience in conducting remote evaluations and using technology (Zoom, MS Teams, etc) - Experience using range of quantitative and qualitative data gathering techniques to assess programme/project results at individual, institutional, sector and policy level - Experience in data analysis methods and tools - Solid knowledge and experience in applying human rights-based approach and Gender and Social Inclusion (GESI) in the evaluation - Demonstrated experience in working with international development organization. Experience with the UN agencies is preferable. - Working knowledge of Libya, particularly in the rule of law, justice, and security sector within development context, including understanding of Libyan Government programme, strategies, and policies on the sector would be an asset Team management This role does not require team management skills.</p><p></p></section>

<p>Are you ready to be at the forefront of digital transformation in Benghazi, Libya? We are seeking an exceptional <strong>Odoo Developer</strong> to join our dynamic team on-site. This is a thrilling opportunity to leverage your expertise in a pivotal role, contributing to innovative solutions and making a significant impact within our organization.</p><p><strong>Overview:</strong> As our Odoo Developer, you will be instrumental in designing, developing, and implementing robust Odoo-based solutions. You will work within a collaborative environment, driving the customization and integration of Odoo to meet our evolving business needs. This role sits at the intersection of IT, software development, and engineering, offering a diverse range of challenges and opportunities for growth.</p><p><strong>Responsibilities:</strong></p><ul><li><strong>Develop and Customize:</strong> Design, develop, and implement Odoo modules and features to enhance business processes.</li><li><strong>System Integration:</strong> Integrate Odoo with various third-party applications and systems to ensure seamless data flow and operational efficiency.</li><li><strong>Technical Support:</strong> Provide expert-level technical support and troubleshooting for Odoo instances and related systems.</li><li><strong>Database Management:</strong> Manage and optimize Odoo databases, ensuring data integrity, security, and performance.</li><li><strong>Requirements Analysis:</strong> Collaborate with stakeholders to gather and analyze business requirements, translating them into technical specifications.</li><li><strong>Code Quality:</strong> Ensure the delivery of high-quality, maintainable, and scalable code following best practices.</li><li><strong>Documentation:</strong> Create and maintain comprehensive technical documentation for all developed solutions.</li></ul><p><strong>Skills & Technologies:</strong> You will be a master of Odoo, possessing a deep understanding of its architecture and development framework. Your toolkit will include strong proficiency in <strong>Python</strong>, <strong>PostgreSQL</strong>, and <strong>JavaScript</strong>. Experience with ERP systems and an understanding of IT and Computer Science principles are crucial for success in this role.</p><p><strong>Growth Opportunities:</strong> We are committed to fostering your professional development. This role offers ample opportunities to expand your skill set in cutting-edge technologies, take on leadership in projects, and advance your career within a growing organization. You'll work on diverse projects that challenge your abilities and broaden your technical horizons.</p><p><strong>Team & Culture:</strong> Join a vibrant and supportive team that values innovation, collaboration, and continuous learning. We foster a culture of open communication, mutual respect, and a shared passion for technology. Your contributions will be recognized and celebrated as part of our collective success.</p><p><strong>Impact:</strong> Your work as an Odoo Developer will directly influence our operational efficiency, drive strategic initiatives, and contribute to our overall success. You will play a key role in shaping our digital landscape, enabling us to achieve our business objectives and deliver exceptional value.</p><p><strong>Requirements</strong></p><ul><li><strong>Experience:</strong> A minimum of <strong>3-7 years of hands-on experience</strong> in Odoo development and implementation.</li><li><strong>Technical Prowess:</strong> Demonstrated expertise in <strong>Odoo</strong>, including module development, customization, and integration.</li><li><strong>Programming Skills:</strong> Strong proficiency in <strong>Python</strong>, <strong>PostgreSQL</strong>, and <strong>JavaScript</strong>.</li><li><strong>Foundational Knowledge:</strong> Solid understanding of <strong>Computer Science</strong> and <strong>Information Technology (IT)</strong> principles.</li><li><strong>ERP Systems:</strong> Proven experience working with ERP systems, preferably Odoo.</li><li><strong>Problem Solver:</strong> Exceptional problem-solving and analytical skills with a keen eye for detail.</li><li><strong>Communication:</strong> Excellent communication and interpersonal skills to collaborate effectively with cross-functional teams.</li><li><strong>Career Level:</strong> This role is designed for an <strong>Experienced</strong> professional eager to take on significant challenges and drive impactful solutions.</li></ul>

<p><strong>Join Our Visionary Team as a MAP Engineer in Benghazi, Libya!</strong></p><p>Are you a seasoned engineering professional with a passion for precise mapping and cutting-edge technology? We are seeking highly skilled and motivated MAP Engineers to lead critical projects on-site in Benghazi. This is an unparalleled opportunity for individuals with a strong background in Computer Engineering, Computer Science, and Information Technology to make a significant impact within the Engineering - Construction/Civil/Architecture sector.</p><ul><li><p><strong>Overview:</strong> As a Senior Management MAP Engineer, you will be at the forefront of developing, implementing, and managing sophisticated mapping solutions for large-scale construction and civil engineering projects. Your expertise will be instrumental in guiding project execution from conceptualization to completion, ensuring the highest standards of accuracy and efficiency.</p></li><li><p><strong>Responsibilities:</strong></p><ul><li><p>Lead and manage all aspects of mapping and geospatial data integration for complex engineering projects.</p></li><li><p>Utilize advanced software and methodologies to create, analyze, and interpret spatial data.</p></li><li><p>Collaborate cross-functionally with project managers, civil engineers, and construction teams to integrate mapping solutions seamlessly.</p></li><li><p>Ensure the quality, accuracy, and integrity of all mapping data and deliverables.</p></li><li><p>Develop and implement innovative strategies for data collection, processing, and visualization.</p></li><li><p>Mentor and guide junior engineers and technical staff, fostering a culture of excellence and continuous improvement.</p></li><li><p>Oversee the maintenance and calibration of mapping equipment and technologies.</p></li><li><p>Contribute to strategic planning and decision-making processes as a key member of senior management.</p></li></ul></li><li><p><strong>Skills/Technologies:</strong> You will leverage your deep understanding of <strong>Computer Engineering</strong>, <strong>Computer Science</strong>, and <strong>Information Technology (IT)</strong>, alongside specialized expertise in <strong>Geographic Information Systems (GIS)</strong>, <strong>Mapping software (e.g., ArcGIS, AutoCAD)</strong>, <strong>Spatial Data Management</strong>, and <strong>Data Analysis</strong>. Proficiency in <strong>Civil Engineering Principles</strong> and <strong>Project Management</strong> will be crucial for success.</p></li><li><p><strong>Growth Opportunities:</strong> This senior management role offers significant avenues for professional development and career advancement. You will be empowered to drive technological innovation, lead high-impact projects, and shape the future of mapping within our organization, with continuous learning and leadership training opportunities.</p></li><li><p><strong>Team/Culture:</strong> We foster a collaborative, results-driven, and supportive environment where innovation is celebrated. You will be part of a dynamic team of experts dedicated to achieving engineering excellence. We value strong <strong>leadership</strong>, effective <strong>communication</strong>, and exceptional <strong>problem-solving</strong> skills.</p></li><li><p><strong>Impact:</strong> Your work will directly influence the successful execution of vital infrastructure and development projects in Benghazi, Libya. You will play a pivotal role in ensuring the accuracy and efficiency that underpins the safety and sustainability of our constructions, leaving a lasting legacy in the region.</p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p><strong>Unleash Your Expertise:</strong> We are looking for highly experienced professionals ready to take on significant leadership responsibilities.</p></li><li><p><strong>Required Skills &amp; Technologies:</strong></p><ul><li><p>Demonstrable expertise in <strong>Computer Engineering</strong>, <strong>Computer Science</strong>, and <strong>Information Technology (IT)</strong> fundamentals.</p></li><li><p>Proven proficiency in <strong>Geographic Information Systems (GIS)</strong> and advanced <strong>Mapping</strong> techniques.</p></li><li><p>Strong command of industry-standard software such as <strong>AutoCAD</strong> and <strong>ArcGIS</strong>.</p></li><li><p>Solid understanding of <strong>Civil Engineering Principles</strong> and their application in mapping.</p></li><li><p>Exceptional skills in <strong>Project Management</strong>, <strong>Data Analysis</strong>, and <strong>Spatial Data Management</strong>.</p></li><li><p>Outstanding <strong>Leadership</strong>, <strong>Strategic Planning</strong>, <strong>Problem Solving</strong>, and <strong>Communication</strong> abilities.</p></li></ul></li><li><p><strong>Experience &amp; Career Level:</strong></p><ul><li><p>A minimum of <strong>4 to 20 years of progressive experience</strong> in mapping, GIS, or related engineering fields.</p></li><li><p>This is a <strong>Senior Management</strong> level position, requiring a proven track record of leading teams and managing complex projects effectively.</p></li></ul></li><li><p><strong>Location &amp; Commitment:</strong></p><ul><li><p>Ability to work <strong>on-site</strong> in Benghazi, Libya, demonstrating a strong commitment to project success in the region.</p></li></ul></li></ul><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for a motivated Entry-Level Digital Drilling Engineer (DDE) to join our team in Libya. The DDE will support the implementation, adoption, and customer use of digital drilling tools such as DrillPlan, DrillOps, and Drilling Data projects. This role offers hands-on experience in digital drilling, technical support, and workflow optimization, while developing expertise in drilling operations and digital solutions. Key Responsibilities Support the implementation and adoption of DrillPlan, DrillOps, and drilling data projects Provide technical and drilling expertise to help customers maximize the value of digital tools Serve as the first point of contact for customers, guiding them through digital drilling change management Capture software enhancement ideas and communicate them to the digital organization Advise Sales and Commercial teams on technical requirements and bid clarifications Perform project technical analysis and evaluate the potential value of digital solutions Participate in technical discussions to optimize customer workflows and requirements Assist in market segmentation exercises, technology gap analysis, and strategy development Capture leads and opportunities for the application of differentiated technology packages Support continuous improvement through engineering corrective actions Promote cross-domain and cross-business line solutions Report on competitor technology applications and industry trends Coordinate DrillPlan and DrillOps deployment, ensuring timely delivery for projects Participate in customer performance reviews and project feedback sessions What We Offer Hands-on experience with cutting-edge digital drilling technology Mentoring from experienced engineers and technical experts Exposure to real-world drilling projects and customer interactions Career development opportunities in digital drilling and petroleum engineering Collaborative and supportive work environment</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Petroleum Engineering, Mechanical Engineering, Geoscience, or a related field</li><li>Basic understanding of drilling operations and digital drilling tools is a plus</li><li>Strong analytical and problem-solving skills</li><li>Excellent communication and teamwork abilities</li><li>Motivation to learn and grow in digital drilling and technical customer support</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the Hiring Company:<p>Space Technology Solutions (STS) is a technology solutions provider based in Tripoli, Libya, focused on supporting the Libyan market with modern IT products, services, and infrastructure solutions. The company provides services such as digital archiving and works with clients across different sectors, including public and private organizations.</p><br>Your Mission as an Account Manager &amp;amp; Pre-Sales Engineer:<p>Your mission is to maintain strong communication with the company’s vendors, partners, and customers while identifying and following new business opportunities.</p><br><p>You will stay updated on the company’s technology products and solutions, understand customer requirements, and recommend suitable IT solutions that support the sales process.</p><br><p>The role requires a combination of relationship management, opportunity follow-up, technical knowledge, and strong communication.</p><br>You Will Be Handling These Duties and Responsibilities as an Account Manager &amp;amp; Pre-Sales Engineer:<ul><li><p>Maintain regular communication with assigned vendors, partners, and customer accounts.</p><br></li><li><p>Build and maintain professional relationships with vendor account managers and technical representatives.</p><br></li><li><p>Stay updated on vendor products, solutions, promotions, partner programs, and important technical developments.</p><br></li><li><p>Monitor customer requirements, tenders, requests for quotations, and potential projects.</p><br></li><li><p>Identify and follow new business opportunities related to the company’s portfolio.</p><br></li><li><p>Understand customer requirements and recommend suitable products and solutions.</p><br></li><li><p>Provide technical pre-sales support, including product selection, solution comparison, technical presentations, and proposal preparation.</p><br></li><li><p>Coordinate with vendors and internal technical teams when additional technical support is required.</p><br></li><li><p>Maintain accurate records of opportunities, communications, pending actions, and next steps.</p><br></li><li><p>Ensure that opportunities and partner requests are followed up consistently and within the required deadlines.</p><br></li></ul>Qualifications and Skills That Will Allow You to Thrive as an Account Manager &amp;amp; Pre-Sales Engineer:<ul><li><p>Minimum of <strong>two years</strong> of relevant experience in account management, technical sales, pre-sales, system integration, or vendor management.</p><br></li><li><p>Good technical knowledge of IT infrastructure, networking, systems, security, backup, virtualization, hardware, and software solutions.</p><br></li><li><p>Familiarity with several technology brands, such as HP, Cisco Technologies and more.</p><br></li><li><p>Ability to understand customer requirements and recommend suitable products and solutions.</p><br></li><li><p>Strong communication, relationship-management, presentation, and follow-up skills.</p><br></li><li><p>Ability to manage several vendors, accounts, and opportunities at the same time.</p><br></li><li><p>Good organizational skills and attention to details.</p><br></li><li><p>Professional working proficiency in English.</p><br></li><li><p>Relevant vendor, technical, sales, or pre-sales certifications are an advantage.</p><br></li></ul>Additional Information<ul><li><p><strong>Working Days &amp;amp; Hours: </strong>Saturday to Thursday (9:00 AM – 4:00 PM)</p><br></li><li><p><strong>Location: </strong>11 JuneTripoli, Libya.</p><br></li><li><p><strong>Benefits:</strong> Paid annual leave and overtime compensation. Sales incentives are open for discussion with highly qualified candidates.</p><br></li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> <b>Job Description</b>:</p> <ul> <li>Cementing calculation, use of software and knowledge of Slurry Design including that for liners &amp; tie-back cases. Preparation / cross checking of cement job plans at site.</li> <li>Means to know about Cement job quality.</li> <li>Good Decision making skill. Lab based test report analysis and slurry design with preflush, spacer, post flush, fluid and volumes calculations.</li> <li>Documentation and preparation of End of the well report.</li> <li>Explore feasibility to use new latest development in Cementing Technology.</li> <li>Experience of water/ gas shut off jobs using cement, micro-fine cement, polymers, chemicals and implications with Cement retainers/ retrievable cementers.</li> <li>Lesson learnt from mistakes, Organizing meeting and presentation to implement new Ideas in the field.</li> <li>Technical integrity and proper Job Design, Experienced in casing/ liner cementation jobs, plugs, LOT (App.50 jobs), Chemical/ polymer water shut off jobs.</li> <li>HP/HT Well experience.</li> </ul> <p> </p> <p> <b>Required Skills and Competencies</b>:</p> <ul> <li>Experience in H2S/ Co2 environment</li> <li>Sea- Hawk Experience </li> <li>HP/HT Well experience.</li> <li>HSE Compliance</li> </ul> <p> </p> <ul> <li> <b>Qualifications &amp; Experience: </b>Degree Physics/ /Mech. Engineering with 2 years or Technical Diploma with 3 yrs as Cementing Supervisor experience, (Onshore/ offshore experience).</li> </ul> <p> <b> </b> </p> <ul> <li> <b>Mention the email ID: </b></li></ul></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Drilling Product Sales Engineer is responsible for growing market share and revenue with assigned accounts while establishing and building strong relationships with customers. This role promotes the sale of BL products and services by leveraging field expertise to match customer needs with applicable solutions. The Sales Engineer will acquire technical knowledge through the fix step program and apply it within the sales organization to optimize opportunities and deliver value to clients.</p><p><strong>Key Responsibilities</strong></p><ul><li>Establish and maintain relationships with customers through field visits, following up on sold jobs, and consulting with clients and stakeholders.</li><li>Act as the customer interface with operations.</li><li>Capture customer business line activity and all local and international competitor activity in GAC.</li><li>Maintain opportunity pipeline and account information in C4C, including customer profiling, visit reports, and customer drivers.</li><li>Coordinate scheduling with the service delivery organization as required.</li><li>Provide basic product/service recommendations and present them to clients.</li><li>Assist in troubleshooting product/service performance in the field and resolving complaints.</li><li>Ensure customer issues arising from sales are responded to and appropriately managed.</li><li>Stay informed about sales programs, new product introductions, and developments within the assigned territory.</li><li>Attend training courses to maintain knowledge of key technologies and competitor practices.</li><li>Maintain awareness of market trends and competitive intelligence and communicate findings to management.</li><li>Identify and communicate potential multi-BL and multi-division opportunities.</li><li>Explore opportunities for value-added products and services.</li><li>Support multiple Business Line operations collaboratively to optimize performance.</li><li>Understand and communicate the value of technology to clients and internal teams.</li></ul><p><strong>What We Offer</strong></p><ul><li>Hands-on experience in sales engineering and client relationship management.</li><li>Mentoring from experienced sales and technical experts.</li><li>Exposure to real-world projects and strategic sales decision-making.</li><li>Career development opportunities within sales and technical operations.</li><li>Collaborative and supportive work environment.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><strong>Qualifications &amp; Experience</strong></p><ul><li>Bachelor s degree in Petroleum Engineering, Mechanical Engineering, or a related field.</li><li>Basic understanding of drilling operations, sales processes, and customer relationship management.</li><li>Strong analytical, problem-solving, and communication skills.</li><li>Ability to work effectively in teams and collaborate across multiple business lines.</li><li>Motivation to learn, grow, and succeed in sales engineering and technical operations.</li></ul><p>SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p><p></p></section>

<p>Outstanding Career Opportunity in the Industrial Sector!</p><p>Are you looking for an ambitious work environment that allows you to utilize your engineering and managerial skills? Join our team at "Al-Madina Misrata for Paints, Pastes and Construction Chemicals", a pioneer in delivering advanced industrial solutions. We are looking for exceptional talents to join our journey of growth and help achieve our organizational goals. </p><p></p><p><strong>Job Title</strong>: Planning and Procurement Specialist </p><p><strong>Location:</strong> Misrata, Libya</p><p><strong>Department</strong>: Planning and Commercial </p><p></p><p></p><p><strong> Job Responsibilities:</strong></p><ul><li><p>Review daily production plan and identify material requirements.</p></li><li><p>Generating and monitoring RM and packaging material plan. </p></li><li><p>Coordinate with relevant departments to ensure materials are available according to production requirements.</p></li><li><p>Creating and Following-up open purchase orders.</p></li><li><p>Maintain continuous communication with suppliers to ensure timely material availability. </p></li><li><p>Invoice &amp; Documentation Follow-up. </p></li></ul><p></p><p><strong>Requirements</strong></p><ul><li><p>Bachelor of Engineering.</p></li><li><p>Major in Industrial Engineering.</p></li><li><p> 1 to 3 years of professional experience in planning or procurement.</p></li><li><p>Proficiency in both Arabic and English languages. </p></li><li><p>Excellent skills in database software, spreadsheet management, and strategic data analysis.</p></li></ul><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>From an automated government through e-Government to a smart and open government, technology and innovation have become vital tools for managing and conducting government business, serving its citizens, and achieving its development targets. The 2030 Agenda for Sustainable Development states that good governance at all levels as well as transparent, effective and accountable institutions are necessary to build peaceful societies and achieve sustainable development. In this Agenda, specific measures are given to achieve such societies especially in Goal 16 Promote peaceful and inclusive societies for sustainable development, provide access to justice for all and build effective, accountable and inclusive institutions at all levels . Under this goal, the development of effective, accountable and transparent institutions (16.6), responsive, inclusive participatory and representative decision-making (16.7) and public access to information (16.10) are promoted as targets. To implement these targets, a partnership, between the Government, the private sector, civil society, other stakeholders (such as the public, and regional, sub-regional and international institutions) and citizens, is envisioned. Better governance and better public institutions are essential elements in achieving the sustainable development goals (SDGs). Technology and innovation provide governments with options to achieve the individual targets set out in Goal 16. Innovation in the public sector provides new processes, products and services that can either be new technologies or be supported by technologies that promotes access to information, inclusiveness, citizen participation, accountability, transparency and responsiveness. When the government adopts new technologies and openness as part of its paradigm, the possibility of collaboration, shared responsibility and co-decision-making, strengthens the government and empowers its citizens. The United Nations is involved in enhancing the use of emerging technologies for sustainable development. In September 2024 during the Summit of the Future, world leaders adopted the Pact for the Future and its annexes: the Global Digital Compact (GDC) and Declaration on Future Generations. The GDC mandates UN Regional Commissions to provide support to Member States to advance digital transformation. Globally, the Intelligent Transport Systems (ITS) market is projected to grow from USD 42.55 billion in 2025 to USD 55.36 billion by 2030 at a CAGR of 5.4%. Digitally driven measures such as smart logistics and improved asset utilization could limit road freight CO emission growth by up to 40% between 2019 and 2050. In the Arab region, 95% mobile broadband coverage a critical enabler for connected mobility . The progressive integration of AI, IoT, GIS and ITS into national transport strategies across Member States, directly serving SDGs 9 and 11. Libya s land transport sector faces acute structural challenges: a paved road network of approximately 34,000 km , one of the highest road-fatality rates in the world publicly cited at around 73 deaths per 100,000 inhabitants against a global benchmark of roughly 20 , Digital transformation of land transport in Libya is expected to (i) reduce fatalities and injuries through intelligent traffic management, e-enforcement, GPS-based fleet supervision and connected-vehicle safety; (ii) modernise freight, customs and logistics operations through digital manifests, tracking and scheduling (iii) enhance public revenue and governance via digital tolling, licensing and vehicle registration; and (iv) anchor land transport within Libya s broader digital transformation and economic recovery agenda. The Land Transport Authority (LTA) in Libya requested the technical assistance of ESCWA to develop their digital transformation strategy. LTA is planning to develop a comprehensive framework to modernize its two main divisions: the Authorization Department and the Transport Affairs Department. This framework will encompass the registration and management of services provided to public vehicles, vehicle testing processes, and the delivery of permit services to individuals and businesses. Currently, most of these services rely on manually maintained Excel-based data, which increases the risk of errors and limits efficiency. The objective of this consultancy is to provide an advisory service to assist ESCWA team in suggesting the digital transformation framework to LTA. The consultant shall propose to the designated ESCWA focal point a detailed version of the digital transformation strategy. To produce the draft strategy, the consultant is requested to conduct, among others, the main following tasks: 1. Review the national digital documents and the existing policies and strategies in Libya related to digital transformation, innovation, digital technologies, and other related national development plans; 2. Review best regional and international best practices related to Digital Transformation Strategies and policies (at least 2 selected regional and 2 international cases); 3. Identify main national stakeholders, hold, in coordination with LTA, interviews and meetings with the main national stakeholders and preparing minutes of each meeting/interview summarizing the discussed points, their remarks, observations and proposals. This includes assessing institutional digital maturity of LTA, its main business processes, and the current data governance; 4. Contribute to sectoral workshops to discuss needs and priorities, if needed; 5. Prepare the needed digital transformation strategy based on international and regional best practices, gap analysis, national needs (SWOT analysis). This strategy would include phased implementation roadmap and change management component; 6. Present the draft report in a national workshop or meeting (physically or remotely) and capture the main comments and findings of the discussions; 7. Update the draft proposal according to all received feedback and comments during the reviewing process by ESCWA and LTA. ESCWA promotes gender equality and integration of youth through its publications and therefore the consultant should pay attention, with the help of ESCWA staff, to gender considerations and youth dimension throughout the research work to ensure that the report gives equal attention to the needs of both men and women, as well as girls and boys. Writing should use gender-sensitive language.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>A Master's degree in ICT, technology, engineering, computer science or a related field is required. A Ph.D. degree is desired. All candidates must submit a copy of the required educational degree. Incomplete applications will not be reviewed. At least 5 years of professional experience and research in the domain of digital technologies is required. Previous experience in transport topics is required. Previous experience in the delivery of research papers is desirable. Previous experience in the development of digital plans is desirable. Fluency in written and spoken Arabic and English is required. Note: Fluency equals a rating of fluent in all four areas (speak, read, write, and understand) and Knowledge of equals a rating of confident in two of the four areas.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>About the Hiring Company</strong><p>A well-established company operating across multiple sectors, specializing in engineering services and consumer technology solutions. The company is actively engaged in importing, distributing, and maintaining advanced technological solutions, including renewable energy technologies, building technology solutions, elevators and escalators, and electrical construction services. Committed to innovation and excellence, the company provides cutting-edge solutions that cater to both business and residential needs.</p><br>What You Will Do as a Director of the Technical Department for Renewable Energy<p>You will lead the technical department and oversee the design, implementation, testing, commissioning, operation, and maintenance of renewable energy projects. You will ensure projects meet approved designs, quality requirements, safety standards, and relevant engineering codes.</p><br>You Will Be Handling These Duties and Responsibilities as a Director of the Technical Department for Renewable Energy<ul><li><p>Lead and develop the renewable energy technical department.</p><br></li><li><p>Review and approve engineering designs, studies, calculations, shop drawings, and technical specifications.</p><br></li><li><p>Supervise project execution and ensure compliance with approved designs, quality plans, and safety requirements.</p><br></li><li><p>Oversee testing, commissioning, and project handover.</p><br></li><li><p>Provide technical solutions for project challenges.</p><br></li><li><p>Manage engineers and technical staff and assign responsibilities.</p><br></li><li><p>Prepare technical reports for senior management.</p><br></li><li><p>Support tenders, technical proposals, and engineering studies.</p><br></li><li><p>Evaluate suppliers, contractors, equipment, and materials from a technical perspective.</p><br></li><li><p>Oversee technical training and staff development.</p><br></li></ul>Qualifications &amp;amp; Skills That Will Allow You to Thrive<ul><li><p>Bachelor’s degree in Electrical or Electromechanical Engineering.</p><br></li><li><p>Master’s degree in Electrical Engineering or Project Management is preferred.</p><br></li><li><p>More than 10 years of relevant experience in solar system design, installation, and commissioning.</p><br></li><li><p>Strong experience managing technical teams and multiple projects.</p><br></li><li><p>Advanced knowledge of PV system design, system sizing, load calculations, and energy-yield studies.</p><br></li><li><p>Strong knowledge of electrical protection, grounding, lightning protection, and international standards such as IEC, NEC, and NFPA.</p><br></li><li><p>Proficiency in PVsyst, AutoCAD, AutoCAD Electrical, ETAP, Microsoft Project or Primavera P6, and Microsoft Office.</p><br></li><li><p>Strong leadership, planning, decision-making, communication, negotiation, and problem-solving skills.</p><br></li><li><p>Proficiency in Arabic and English.</p><br></li></ul>Additional Information<p><strong>Employment Type:</strong> Full-time<br><strong>Work Type:</strong> Office-based with site supervision<br><strong>Working Days &amp;amp; Hours:</strong> Saturday to Thursday, 9:00 AM to 4:00 PM<br><strong>Location:</strong> Tripoli or Benghazi<br><strong>Benefits:</strong> Transportation and accommodation provided</p><br> </div>

<p>Comprehensive theoretical and practical knowledge in Corrosion Prediction and Material Selection Studies related to Oil and Gas Industry and to have a vast knowledge on mechanisms of corrosion in Sweet, Sour, and atmospheric corrosion, water treatment, corrosion.</p><p>Experience in monitoring, failure analysis, corrosion surveys/audits. Corrosion related inspections and technical recommendation for corrective actions.</p><p>Extensive knowledge on Corrosion Mitigation by Chemical Inhibition, Cathodic Protection, Protective painting/coating and Corrosion Monitoring techniques.</p><p>To be well conversant with International Material Standards. Experience with the use of international standards and codes of practises, such as API, ASME, ASTM, BS, ANSI, etc.</p><p>Good knowledge in specification development, practical field support and corrosion research.</p><p>Comprehensive experience and knowledge in the use of corrosion prediction software.</p><p>Have extensive knowledge in Cathodic Protection Design onshore facilities.</p><p>Possess theoretical and practical knowledge in Metallurgical processing and Welding Engineering.</p><p>To create innovating ideas, technical writing and presentation.</p><p>Prepare scope of work, for new requirement in CP system design, which will be forwarded to vendors and contractors.</p><p>Review contractors and vendors scopes.</p><p>Review and make recommendation, in relation to pipeline intelligent pigging.</p><p>Interpretation &amp; application of Engineering schematics &amp; diagrams related to C.P system.</p><p>Maintain effective performance measures for all CP systems.</p><p>Prepare and review surface preparation, painting and coating procedures to be followed at site and at vendor's workshop.</p><p>Follow and enforce the QHSE policy from Company.</p><p><strong>Desired Candidate Profile</strong></p>Skills : Corrosion Engineering <br> Experience : 10 + Years <br> Education : Bachelors/3-5 yr Degree <br> Employment Type : Rotational Contractor <br> Location : Tripoli, Tripoli District, Libya

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Laboratory Technologist II is responsible to perform and provide analysis for low to high complex diagnostic testing in the relevant section and provide Phlebotomy services especially for difficult blood draws.&nbsp;</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Actively participates in the technical and analytical work of the section.&nbsp;</p><br> <p>Liaises with the Team Lead on appropriateness of tests, results, and additional testing as required.&nbsp;</p><br> <p>Monitors, records, reports back results, and participates in discussions to rectify areas of concern if necessary.&nbsp;</p><br> <p>Identifies problems that may adversely affect test performance or reporting of test results and either corrects the problem or notifies the Team Lead.&nbsp;</p><br> <p>Responds to questions/queries and resolves problems pertaining to test requisitions, specimen requirements, test additions, priority changes (from routine to STAT and vice versa) and patient results.&nbsp;</p><br> <p>Investigates and takes action to resolve the problems with analytical methods and equipment.&nbsp;</p><br> <p>Collects laboratory specimens and performs assigned laboratory procedures and other tests as necessary and immediately reports abnormal findings to appropriate staff. </p><br> <p>Verifies all critical results and documents with accurate follow-up. </p><br> <p>Performs pediatric and adult phlebotomy.&nbsp;</p><br> <p>Provides phlebotomy support to other clinical units for patients with difficult veins.&nbsp;</p><br> <p>Collects venous and capillary blood, using precautions that ensure the safety of the patient and Laboratory staff.&nbsp;</p><br> <p>Performs positive patient identification and records appropriate collection information in the Center information system or on the Laboratory requisition form.&nbsp;</p><br> <p>Ensures that all specimen collections and processing are performed in compliance with JCI, CAP and ISO15189 guidelines.&nbsp;</p><br> <p>Performs appropriate documentation of Laboratory procedures to assure the accuracy of Laboratory records.&nbsp;</p><br> <p>Assists the Team Lead in inventory management which includes stock monitoring and ordering.&nbsp;</p><br> <p>Operates complex automated Laboratory equipment, computer software, and precision instruments.&nbsp;</p><br> <p>In liaison with the Team Lead, provides technical advice on, and assists in the selection / validation of new equipment.&nbsp;</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p>Takes responsibility for the maintenance and safe use of equipment within the section. </p><br> <p>Uses Laboratory Information System (LIS) to generate workload statistics, run queries and assess quality of data according to defined criteria.&nbsp;</p><br> <p>Responsible for planning, performing, and evaluating Laboratory testing analysis and quality control.&nbsp;</p><br> <p>Ensures compliance to all policies and procedures.&nbsp;</p><br> <p>Adheres to KMC standards as per the Code of Conduct and Conflict of Interest policies.&nbsp;</p><br> <p>Adheres to the Laboratory’s quality control policies and procedures and performs, reviews, and documents all quality control activities accordingly.&nbsp;</p><br> <p>Helps ensure the provision of a high quality, cost-effective service with the emphasis on quality assurance in all aspects of the section supervised by monitoring and audit of internal quality control.&nbsp;</p><br> <p>Ascertains that quality control procedures are followed prior to releasing clinical data.&nbsp;</p><br> <p>Reviews and evaluates quality control, proficiency, and competency. </p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Expert in pediatric and adult phlebotomy.&nbsp;</p><br> <p>Functional knowledge and clinical experience in Clinical laboratories.&nbsp;</p><br> <p>Knowledge of and experience with Clinical laboratory safety and risks.&nbsp;</p><br> <p>Knowledge of ISO 15189/CAP/JCI standards and guidelines.&nbsp;</p><br> <p>Demonstrated strong analytical and decision-making skills.&nbsp;</p><br> <p>Excellent communication and interpersonal skills.&nbsp;</p><br> <p>Proficiency with Microsoft Office suite</p><br> <br><br><u><b>Job Experience</b></u> <br><p>Minimum 4 years’ experience in clinical laboratories as a licensed Clinical Scientist or Technologist (Required). </p><br> <p>Minimum 3 years of Phlebotomy experience in a pediatric hospital (Required)</p><br> <p>Minimum 3 years as a Technologist in a CAP or ISO15189 laboratory (Preferred)</p><br> <p>Minimum 2 years in GCC (Preferred)</p><br> <br><br><u><b>Competencies</b></u> <br>Agility<br>Data Analysis and Interpretation L3<br>Laboratory Testing and Analysis L3<br>Sample Handling and Preparation L3<br>Regulatory Compliance L3<br>Quality Assurance and Control L3<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Biomedical Engineering or any related field<br><br><br><br> </div>

<p><strong>Join Our Visionary Team as a Construction Manager in Benghazi, Libya!</strong></p><p>Are you a seasoned construction professional ready to lead groundbreaking projects in Benghazi? We are seeking a dynamic and results-driven <strong>Construction Manager</strong> to oversee all aspects of our on-site construction operations. This is an unparalleled opportunity to make a significant impact on critical infrastructure and development initiatives within the region.</p><ul><li><strong>Overview:</strong> As our Construction Manager, you will be the cornerstone of our on-site operations, ensuring projects are delivered safely, on time, and within budget. You will be instrumental in transforming designs into tangible structures, driving excellence at every stage.</li><li><strong>Responsibilities:</strong><ul><li><strong>Lead and inspire</strong> project teams, subcontractors, and vendors to achieve project objectives.</li><li><strong>Oversee all phases</strong> of construction projects, from initial planning and resource allocation to execution and completion.</li><li><strong>Ensure strict adherence</strong> to engineering plans, specifications, safety standards, and quality control protocols.</li><li><strong>Manage project budgets</strong>, schedules, and resource allocation to optimize efficiency and profitability.</li><li><strong>Implement robust risk management</strong> strategies to anticipate and mitigate potential challenges.</li><li><strong>Foster a collaborative and safe</strong> working environment on site in Benghazi.</li><li><strong>Act as the primary point of contact</strong> for all on-site matters, coordinating with stakeholders and resolving issues promptly.</li></ul></li><li><strong>Skills &amp; Technologies:</strong> This role demands a strong command of <strong>Civil Engineering</strong> principles, extensive experience in <strong>Construction</strong> practices, and exceptional <strong>Project Management</strong> capabilities. Proficiency in relevant <strong>Engineering</strong> software and a deep understanding of site management best practices are essential.</li><li><strong>Growth Opportunities:</strong> We are committed to your professional development. This role offers significant opportunities for career advancement, leading larger and more complex projects, and shaping the future of our construction division in Libya.</li><li><strong>Team &amp; Culture:</strong> You will join a highly collaborative and dedicated team that values innovation, integrity, and a commitment to excellence. We foster a supportive environment where your expertise is recognized and your contributions are celebrated.</li><li><strong>Impact:</strong> Your leadership will directly contribute to the successful delivery of vital projects that enhance the community and infrastructure of Benghazi, leaving a lasting legacy.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>About the Hiring Company</strong><p>A well-established company operating across multiple sectors, specializing in engineering services and consumer technology solutions. The company is actively engaged in importing, distributing, and maintaining advanced technological solutions, including renewable energy technologies, building technology solutions, elevators and escalators, and electrical construction services. Committed to innovation and excellence, the company provides cutting-edge solutions that cater to both business and residential needs.</p><br>What You Will Do as a <span>Solar PV Installation Technician</span><p><span>As a Solar PV Installation Technician, your mission is to install, commission, and maintain solar photovoltaic systems in line with approved engineering drawings, technical specifications, and health and safety standards. You will support the successful execution of solar projects by ensuring high-quality installation, safe fieldwork, proper testing, and reliable system performance.</span></p><br>You Will Be Handling These Duties and Responsibilities as a <span>Solar PV Installation Technician</span><ul><li><p><span>Install solar PV mounting structures on rooftops and ground-mounted systems.</span></p><br></li><li><p><span>Install solar panels, inverters, batteries, combiner boxes, protection panels, and circuit breakers according to approved designs.</span></p><br></li><li><p><span>Carry out DC and AC cable routing, wiring, termination, grounding, and lightning protection works.</span></p><br></li><li><p><span>Perform electrical inspections, pre-commissioning checks, voltage measurements, current measurements, and continuity testing.</span></p><br></li><li><p><span>Participate in system commissioning and initial start-up activities.</span></p><br></li><li><p><span>Verify that system performance matches the approved design specifications.</span></p><br></li><li><p><span>Perform preventive and scheduled maintenance for solar PV systems.</span></p><br></li><li><p><span>Diagnose electrical and mechanical faults and replace damaged or defective components.</span></p><br></li><li><p><span>Clean solar PV modules when required and maintain tools, equipment, and work areas in good condition.</span></p><br></li><li><p><span>Follow HSE procedures, use PPE properly, and work safely on rooftops and elevated areas.</span></p><br></li><li><p><span>Prepare daily progress reports, maintenance reports, material records, and technical observations for the supervisor.</span></p><br></li></ul>Qualifications &amp;amp; Skills That Will Allow You to Thrive<ul><li><p><span>Diploma or Higher Diploma in Electrical Engineering, Electronics, Renewable Energy, or a related technical discipline.</span></p><br></li><li><p><span>Minimum 5 years of experience in solar PV system installation.</span></p><br></li><li><p><span>Proven experience with On-Grid, Off-Grid, and Hybrid Solar PV systems.</span></p><br></li><li><p><span>Ability to read and interpret electrical drawings and wiring diagrams.</span></p><br></li><li><p><span>Good knowledge of electrical wiring, cable routing, termination, grounding, and protection systems.</span></p><br></li><li><p><span>Experience installing and connecting PV modules, inverters, batteries, and related solar system components.</span></p><br></li><li><p><span>Proficiency in using electrical testing and measuring instruments.</span></p><br></li><li><p><span>Strong troubleshooting and fault diagnosis skills.</span></p><br></li><li><p><span>Ability to use hand tools and power tools safely and effectively.</span></p><br></li><li><p><span>Good teamwork, discipline, punctuality, attention to detail, and communication skills.</span></p><br></li><li><p><span>Physically fit to work outdoors, handle equipment safely, and work at heights.</span></p><br></li><li><p><span>HSE, Working at Heights, First Aid, or Solar PV Installation certificates are preferred.</span></p><br></li><li><p><span>Valid driving license is preferred.</span></p><br></li></ul>Additional Information<p><strong>Employment Type:</strong> Full-time<br><strong>Work Type:</strong> Field visits and installation with office presence<br><strong>Working Days &amp;amp; Hours:</strong> Saturday to Thursday, 9:00 AM to 4:00 PM<br><strong>Location:</strong> Tripoli<br><strong>Benefits:</strong> Transportation and accommodation provided</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Result of Service The report prepared should be in Arabic and in electronic format. The report submitted should not be less than 30 pages. A 2 to 4 pages executive summary of the report. The completed parts should be edited and saved in MS-Word (*.docx file) or an alternate compatible format. PDF format will not be accepted. It should include a table of contents to be automatically upndated followed by a list of all tables and figures. The various parts should be submitted in electronic form and sent to the email address of the designated focal point. Attention is kindly drawn to the need to ensure that the final draft of the outputs be thoroughly reviewed prior to submission and to indicate the sources of tables and diagrams. References to reports and other substantive material should be clearly indicated within the text and noted at the end. It is also essential to send, with the completed output, photocopies or scans of at least the first page of books, reports and bulletins, used as reference material as well as copies of the pages quoted. The content of the generated document shall be the sole property of ESCWA. The consultant shall keep in mind that UN-ESCWA routinely checks all deliverables for plagiarism, using readily available electronic tools. All previously published content, even if written by the selected consultant, must be clearly referenced where required within the text and end-noted at the end of the study. The report submitted by the consultant must not contain quoted and/or previously published text equalling more than 20 per cent of the total number of pages. The consultant shall not publish or announce or reveal the content of the report, partly or entirely, on social media or any other public channel, without ESCWA and GIA permission. The content of the generated document shall be the sole property of ESCWA. Work Location Remote Expected duration 16 weeks Duties and Responsibilities GENERAL SCOPE Digital identity (e-ID) is increasingly recognized as a foundational enabler of sustainable development because it underpins access to services, rights, and economic participation. The UN Sustainable Development Goals explicitly include legal identity for all (SDG 16.9), highlighting its role in inclusion and governance. In fact, e-ID allows individuals to securely prove their identity in digital environments, which improves access to healthcare, education, financial services, and social protection while reducing costs and improving efficiency in delivery. Identity verification is also essential for the resilience of societies and economies. Well-governed digital identity systems are now viewed as critical digital public infrastructure necessary for long-term sustainability and trust in digital transformation . Globally, the impact of e-ID is transformative but uneven. The World Economic Forum (WEF) highlights that around 850 million people still lack legal identification, limiting their ability to participate fully in society and the economy. Expanding digital identity systems can significantly improve inclusion, enabling access to digital services, financial systems, and labor markets while enhancing privacy and user control when properly designed. Regionally, especially in developing economies, e-ID is expected to accelerate digital economies and public sector efficiency; however, gaps in infrastructure, governance, and interoperability remain major barriers. Evidence also shows that lack of ID restricts access to essentials such as mobile connectivity, banking, healthcare, and voting, demonstrating the broad socio-economic consequences of identity exclusion. Two widely cited global success cases are Estonia and India. Estonia s e-ID is considered a global benchmark, where over 99% of public services are accessible online and citizens use digital identity for voting, healthcare, taxation, and business, demonstrating how e-ID can anchor a fully digital society . Its success is grounded in strong legal frameworks, interoperability, and universal adoption. Another example is India s Aadhaar system , which has enabled large-scale inclusion in financial services and targeted welfare delivery. These cases illustrate that successful e-ID systems combine policy, technology, and governance to drive adoption and trust . For Libya, developing a robust e-ID policy is critical to advancing its digital transformation agenda and overcoming governance and service delivery challenges. Given Libya s high internet penetration, a clear, comprehensive e-ID policy would strengthen trust, improve interoperability across government services, and address gaps in data protection and digital governance. The General Information Authority (GIA) in Libya requested the technical assistance of ESCWA to develop the national digital identity policy. The objective of this consultancy is to provide an advisory service to assist ESCWA team in suggesting the digital identity policy to the GIA. DUTIES AND RESPONSIBILITIES The consultant shall propose to the designated ESCWA focal point a detailed version of the digital identity policy. To produce the draft policy, the consultant is requested to conduct, among others, the main following tasks: 1. Review the national digital documents and the existing policies and strategies in Libya related to digital transformation, innovation, digital technologies, and other related national development plans; 2. Review best regional and international best practices related to digital identity policies and frameworks (at least 2 selected regional and 2 international cases); 3. Identify main national stakeholders, hold, in coordination with GIA, interviews and meetings with the main national stakeholders and preparing minutes of each meeting/interview summarizing the discussed points, their remarks, observations and proposals; 4. Contribute to sectoral workshops to discuss needs and priorities, if needed; 5. Prepare the needed digital identity policy based on international and regional best practices, gap analysis, national needs (SWOT analysis); 6. Present the draft report in a national workshop or meeting (physically or remotely) and capture the main comments and findings of the discussions; 7. Update the draft proposal according to all received feedback and comments during the reviewing process by ESCWA and GIA. ESCWA promotes gender equality and integration of youth through its publications and therefore the consultant should pay attention, with the help of ESCWA staff, to gender considerations and youth dimension throughout the research work to ensure that the report gives equal attention to the needs of both men and women, as well as girls and boys. Writing should use gender-sensitive language.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">A Master's degree in ICT, technology, engineering, computer science or a related field is required. A Ph.D. degree is desired. All candidates must submit a copy of the required educational degree. Incomplete applications will not be reviewed. At least 5 years of professional experience and research in the domain of digital technologies is required. Previous experience in the delivery of research papers is desirable. Previous experience in the development of digital identity plans is desirable. English and French are the working languages of the United Nations Secretariat; and Arabic is a working language of ESCWA. For this position, Fluency in written and spoken Arabic and English is required. Note: Fluency equals a rating of fluent in all four areas (speak, read, write, and understand) and Knowledge of equals a rating of confident in two of the four areas.</p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Laboratory Technologist II is responsible to perform and provide analysis for low to high complex diagnostic testing in the relevant section and provide Phlebotomy services especially for difficult blood draws.&nbsp;</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Actively participates in the technical and analytical work of the section.&nbsp;</p><br> <p>Liaises with the Team Lead on appropriateness of tests, results, and additional testing as required.&nbsp;</p><br> <p>Monitors, records, reports back results, and participates in discussions to rectify areas of concern if necessary.&nbsp;</p><br> <p>Identifies problems that may adversely affect test performance or reporting of test results and either corrects the problem or notifies the Team Lead.&nbsp;</p><br> <p>Responds to questions/queries and resolves problems pertaining to test requisitions, specimen requirements, test additions, priority changes (from routine to STAT and vice versa) and patient results.&nbsp;</p><br> <p>Investigates and takes action to resolve the problems with analytical methods and equipment.&nbsp;</p><br> <p>Collects laboratory specimens and performs assigned laboratory procedures and other tests as necessary and immediately reports abnormal findings to appropriate staff. </p><br> <p>Verifies all critical results and documents with accurate follow-up. </p><br> <p>Performs pediatric and adult phlebotomy.&nbsp;</p><br> <p>Provides phlebotomy support to other clinical units for patients with difficult veins.&nbsp;</p><br> <p>Collects venous and capillary blood, using precautions that ensure the safety of the patient and Laboratory staff.&nbsp;</p><br> <p>Performs positive patient identification and records appropriate collection information in the Center information system or on the Laboratory requisition form.&nbsp;</p><br> <p>Ensures that all specimen collections and processing are performed in compliance with JCI, CAP and ISO15189 guidelines.&nbsp;</p><br> <p>Performs appropriate documentation of Laboratory procedures to assure the accuracy of Laboratory records.&nbsp;</p><br> <p>Assists the Team Lead in inventory management which includes stock monitoring and ordering.&nbsp;</p><br> <p>Operates complex automated Laboratory equipment, computer software, and precision instruments.&nbsp;</p><br> <p>In liaison with the Team Lead, provides technical advice on, and assists in the selection / validation of new equipment.&nbsp;</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p>Takes responsibility for the maintenance and safe use of equipment within the section. </p><br> <p>Uses Laboratory Information System (LIS) to generate workload statistics, run queries and assess quality of data according to defined criteria.&nbsp;</p><br> <p>Responsible for planning, performing, and evaluating Laboratory testing analysis and quality control.&nbsp;</p><br> <p>Ensures compliance to all policies and procedures.&nbsp;</p><br> <p>Adheres to KMC standards as per the Code of Conduct and Conflict of Interest policies.&nbsp;</p><br> <p>Adheres to the Laboratory’s quality control policies and procedures and performs, reviews, and documents all quality control activities accordingly.&nbsp;</p><br> <p>Helps ensure the provision of a high quality, cost-effective service with the emphasis on quality assurance in all aspects of the section supervised by monitoring and audit of internal quality control.&nbsp;</p><br> <p>Ascertains that quality control procedures are followed prior to releasing clinical data.&nbsp;</p><br> <p>Reviews and evaluates quality control, proficiency, and competency. </p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Expert in pediatric and adult phlebotomy.&nbsp;</p><br> <p>Functional knowledge and clinical experience in Clinical laboratories.&nbsp;</p><br> <p>Knowledge of and experience with Clinical laboratory safety and risks.&nbsp;</p><br> <p>Knowledge of ISO 15189/CAP/JCI standards and guidelines.&nbsp;</p><br> <p>Demonstrated strong analytical and decision-making skills.&nbsp;</p><br> <p>Excellent communication and interpersonal skills.&nbsp;</p><br> <p>Proficiency with Microsoft Office suite</p><br> <br><br><u><b>Job Experience</b></u> <br><p>Minimum 4 years’ experience in clinical laboratories as a licensed Clinical Scientist or Technologist (Required). </p><br> <p>Minimum 3 years of Phlebotomy experience in a pediatric hospital (Required)</p><br> <p>Minimum 3 years as a Technologist in a CAP or ISO15189 laboratory (Preferred)</p><br> <p>Minimum 2 years in GCC (Preferred)</p><br> <br><br><u><b>Competencies</b></u> <br>Agility<br>Data Analysis and Interpretation L3<br>Laboratory Testing and Analysis L3<br>Sample Handling and Preparation L3<br>Regulatory Compliance L3<br>Quality Assurance and Control L3<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Biomedical Engineering or any related field<br><br><br><br> </div>

<p>Key Responsibilities Maintain and improve banking systems (Core Banking, AML, Reporting) based on Temenos products. Analyze and troubleshoot production issues, delivering timely and effective solutions. Interpret BRD/FSD documents and prepare detailed TSDs for development. Provide support for test environments, package preparation, and deployment activities. Collaborate with senior IT staff, business analysts, and team managers to deliver high-quality solutions. Design, develop, and maintain customizations in Temenos T24 (Transact). Work extensively on T24 modules including AA, Loans, Deposits, and TPH. Develop and integrate T24 interfaces using T24 APIs and Integration Frameworks.</p><p>Preferred Skills &amp; Experience Strong hands-on experience with Temenos T24 Core Banking system. Mandatory skills: Infobasic programming, componentization coding, and L3 Java development. Proficiency in TAFJ and knowledge of TAFC. Experience in code library management and version control tools. Expertise in T24 API development (screen changes, new inquiries, custom integrations). Solid technical knowledge of T24 customization and OFS processing. Basic working knowledge of Unix/Linux environments. Strong problem-solving skills and ability to work in fast-paced, client-facing environments.</p><p>What Wecodee Offers Opportunity to work on cutting-edge T24/TPH projects in a dynamic banking environment. Exposure to international banking systems and regulatory compliance projects. Collaborative team culture with growth opportunities in core banking and payments domain.</p><p><strong>Desired Candidate Profile</strong></p><p>Strong hands-on experience with Temenos T24 Core Banking system. Mandatory skills: Infobasic programming, componentization coding, and L3 Java development. Proficiency in TAFJ and knowledge of TAFC. Experience in code library management and version control tools. Expertise in T24 API development (screen changes, new inquiries, custom integrations). Solid technical knowledge of T24 customization and OFS processing. Basic working knowledge of Unix/Linux environments. Strong problem-solving skills and ability to work in fast-paced, client-facing environments.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Geosolutions Geophysicist holds a crucial role in project execution and the formulation of solutions to address encountered challenges. Furthermore, this geophysicist actively engages in quality control and quality assurance efforts, aiming to enhance both product quality and client satisfaction. As a Geosolutions Geophysicist you can expect to create intricate and high-definition representations of the subsurface, involving the processing and imaging of 2D, 3D, and time-lapse seismic data while integrating and collaborating with geologists and reservoir characterization champions. The position reports to a Project Manager and frequently involves collaboration with an extensive team. Essential Responsibilities and Duties: Collaborate with a diverse team to provide a high-quality product according to the established schedule. Maintain regular communication with customers and offer guidance on processing parameters. Process data using the appropriate technology and software. Develop solutions and new workflows to address challenges encountered during processing. Develop your experience and scientific critical thinking to establish, construct, and submit processing tasks, analyze outcomes, offer parameter-related suggestions, and propose additional testing if deemed necessary. Ensure the precision and effectiveness of all testing and production job sequences through validation. Keep abreast of emerging technologies within seismic and non-seismic data processing techniques. Participate in accredited professional societies and technical conferences.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">We are seeking candidates with minimum 5 years of experience as Geophysicist. Minimum Geosciences degree or equivalent. Proficient in Seismic Processing software, preferably Omega. Proficient in Signal Processing, Velocity Model Building and Time and Depth Imaging. Prospective candidates should possess strong communication skills, have a passion for continuous learning and problem-solving, and thrive in collaborative team environments. Candidate will be assigned to the Libya Tripoli SLB office. Candidate must have authorization to work in the assigned location. SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, national origin, age, disability, or other characteristics protected by law.</p></section>