وظائف فنى سحب دم

Plastic Scissors Machine Operators Technician (Detailing) First: Basic Operational Tasks Receiving and Preparation Receiving raw plastic rolls (rolls) from the warehouse or from the printing/blowing section according to production stages Ensure the roll type, size and color match the production order Mount the roll on the machine and ensure proper material feed alignment Adjust the machine before operation Adjust cutting sizes (length and width) according to required specifications Adjust Sealing/Cutting Temperature Adjust machine speed to suit material thickness and type Calibrate the photocell system to synchronize cutting with printing if present Start the machine and monitor production Run the machine and supervise the first cycle to ensure cutting and sealing accuracy Continuous monitoring of bag quality (cut straightness, seal integrity, bags free from holes or tears) Periodic sampling for inspection and matching with quality specifications Record actual production quantities versus target quantities Second: Maintenance and Safety Periodic (preventive) maintenance Clean knives and thermal molds after each shift Inspect feeding belts and pulleys for wear Grease moving mechanical parts according to maintenance schedule Immediate reporting of any faults or unusual noises to maintenance Occupational Safety Requirements Wear personal protective equipment (gloves, goggles, mask when needed) Stop the machine completely before any manual intervention near knives Do not put hands in the cutting area while operating Keep the work area clean and organized to prevent slips or trips Third: Quality and Documentation Quality control Ensure the weight (grams) of the bag matches the approved specification Reject and process non-conforming production and record scrap rate Immediate handling of any deviation in cut size or seal weakness by readjustment Documentation and reports Fill out the daily production log (quantity, scrap, downtime if any) Record data for each job (job number, size, quantity, date) Submit the shift report to the department head or supervisor Fourth: Additional Responsibilities Train auxiliary workers on feeding and packing basics beside the machine Participate in the quarterly inventory of raw materials and finished product Comply with production orders and prioritization as determined by supervisor Maintain the machine and accessories and ensure it is not operated by unauthorized personnel <p><strong>Additional Details</strong></p><ul><li>Number of vacancies: 2</li><li>Shift system: morning and evening</li><li>Benefits: transportation allowance, meals, housing, overtime</li></ul>

Plastic Scissors Machine Operator Technician (Detail)<br>First: Basic Operational Tasks<br><br>Receiving and Preparation<br><br>Receiving raw plastic rolls (sleeves) from the warehouse or from the printing/blowing section according to production stages<br>Ensure the roll type, size, and color match the production order<br>Mounting the roll on the machine and ensuring material feed alignment<br><br><br>Machine setup before operation<br><br>Set cutting dimensions (length and width) according to required specifications<br>Set sealing/cutting temperature<br>Set machine speed appropriate to material thickness and type<br>Calibrate photocell system to synchronize cutting with printing if present<br><br><br>Machine operation and production monitoring<br><br>Operate the machine and monitor the first cycle to ensure cut and seal accuracy<br>Continuous monitoring of bag quality (cut alignment, seal integrity, bags free of holes or tears)<br>Periodic sampling for inspection and comparison with quality specifications<br>Record actual production quantities versus targeted quantities<br><br><br>Second: Maintenance and Safety<br><br>Periodic (preventive) maintenance<br><br>Clean knives and heat-sealing molds after each shift<br>Inspect feeding belts and rollers for wear<br>Lubricate moving mechanical parts according to the maintenance schedule<br>Immediately report any faults or unusual sounds to the maintenance department<br><br><br>Occupational safety requirements<br><br>Wear personal protective equipment (gloves, goggles, mask when needed)<br>Completely stop the machine before any manual intervention near the knives<br>Commit to not inserting hands into the cutting area during operation<br>Keep the work area clean and organized to prevent slipping or tripping<br><br><br><br>Third: Quality and Documentation<br><br>Quality control<br><br>Ensure bag weight (grams) matches the approved specification<br>Reject and process non-conforming production and record scrap rate<br>Immediately address any deviation in cut size or weak seal by readjusting<br><br><br>Documentation and reports<br><br>Fill daily production log (quantity, scrap, downtime if any)<br>Record data for each production order (order number, size, quantity, date)<br>Submit shift report to department head or supervisor<br><br><br><br>Fourth: Additional Responsibilities<br><br>Train assistant workers on feeding and packing basics beside the machine<br>Participate in periodic inventory of raw materials and finished product<br>Adhere to production orders and priority sequence as determined by supervisor<br>Maintain the machine and accessories and ensure it is not operated by unauthorized personnel

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Laboratory Technologist II is responsible to perform and provide analysis for low to high complex diagnostic testing in the relevant section and provide Phlebotomy services especially for difficult blood draws.&nbsp;</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Actively participates in the technical and analytical work of the section.&nbsp;</p><br> <p>Liaises with the Team Lead on appropriateness of tests, results, and additional testing as required.&nbsp;</p><br> <p>Monitors, records, reports back results, and participates in discussions to rectify areas of concern if necessary.&nbsp;</p><br> <p>Identifies problems that may adversely affect test performance or reporting of test results and either corrects the problem or notifies the Team Lead.&nbsp;</p><br> <p>Responds to questions/queries and resolves problems pertaining to test requisitions, specimen requirements, test additions, priority changes (from routine to STAT and vice versa) and patient results.&nbsp;</p><br> <p>Investigates and takes action to resolve the problems with analytical methods and equipment.&nbsp;</p><br> <p>Collects laboratory specimens and performs assigned laboratory procedures and other tests as necessary and immediately reports abnormal findings to appropriate staff. </p><br> <p>Verifies all critical results and documents with accurate follow-up. </p><br> <p>Performs pediatric and adult phlebotomy.&nbsp;</p><br> <p>Provides phlebotomy support to other clinical units for patients with difficult veins.&nbsp;</p><br> <p>Collects venous and capillary blood, using precautions that ensure the safety of the patient and Laboratory staff.&nbsp;</p><br> <p>Performs positive patient identification and records appropriate collection information in the Center information system or on the Laboratory requisition form.&nbsp;</p><br> <p>Ensures that all specimen collections and processing are performed in compliance with JCI, CAP and ISO15189 guidelines.&nbsp;</p><br> <p>Performs appropriate documentation of Laboratory procedures to assure the accuracy of Laboratory records.&nbsp;</p><br> <p>Assists the Team Lead in inventory management which includes stock monitoring and ordering.&nbsp;</p><br> <p>Operates complex automated Laboratory equipment, computer software, and precision instruments.&nbsp;</p><br> <p>In liaison with the Team Lead, provides technical advice on, and assists in the selection / validation of new equipment.&nbsp;</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p>Takes responsibility for the maintenance and safe use of equipment within the section. </p><br> <p>Uses Laboratory Information System (LIS) to generate workload statistics, run queries and assess quality of data according to defined criteria.&nbsp;</p><br> <p>Responsible for planning, performing, and evaluating Laboratory testing analysis and quality control.&nbsp;</p><br> <p>Ensures compliance to all policies and procedures.&nbsp;</p><br> <p>Adheres to KMC standards as per the Code of Conduct and Conflict of Interest policies.&nbsp;</p><br> <p>Adheres to the Laboratory’s quality control policies and procedures and performs, reviews, and documents all quality control activities accordingly.&nbsp;</p><br> <p>Helps ensure the provision of a high quality, cost-effective service with the emphasis on quality assurance in all aspects of the section supervised by monitoring and audit of internal quality control.&nbsp;</p><br> <p>Ascertains that quality control procedures are followed prior to releasing clinical data.&nbsp;</p><br> <p>Reviews and evaluates quality control, proficiency, and competency. </p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Expert in pediatric and adult phlebotomy.&nbsp;</p><br> <p>Functional knowledge and clinical experience in Clinical laboratories.&nbsp;</p><br> <p>Knowledge of and experience with Clinical laboratory safety and risks.&nbsp;</p><br> <p>Knowledge of ISO 15189/CAP/JCI standards and guidelines.&nbsp;</p><br> <p>Demonstrated strong analytical and decision-making skills.&nbsp;</p><br> <p>Excellent communication and interpersonal skills.&nbsp;</p><br> <p>Proficiency with Microsoft Office suite</p><br> <br><br><u><b>Job Experience</b></u> <br><p>Minimum 4 years’ experience in clinical laboratories as a licensed Clinical Scientist or Technologist (Required). </p><br> <p>Minimum 3 years of Phlebotomy experience in a pediatric hospital (Required)</p><br> <p>Minimum 3 years as a Technologist in a CAP or ISO15189 laboratory (Preferred)</p><br> <p>Minimum 2 years in GCC (Preferred)</p><br> <br><br><u><b>Competencies</b></u> <br>Agility<br>Data Analysis and Interpretation L3<br>Laboratory Testing and Analysis L3<br>Sample Handling and Preparation L3<br>Regulatory Compliance L3<br>Quality Assurance and Control L3<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Biomedical Engineering or any related field<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p><span><span><span><span>The Anesthesia Technologist assists the licensed anesthesia provider in the acquisition, preparation and application of equipment and supplies required for the administration of anesthesia. Is committed to customer service and has the ability to meet the needs and expectations of healthcare colleagues and patients, adapts well and is flexible to changing situations, and demonstrates effective communication and teamwork skills. Provides support in anesthesia for routine and complex surgical cases by preparing and maintaining patient monitoring devices and anesthesia delivery systems before, during, and after anesthesia. Responsibilities include but are not limited to assisting the licensed anesthesia provider in various settings, performing duties under the direct supervision of the licensed anesthesia provider, and providing support for routine surgical cases. Identifies safety concerns in the age-related population and is able to institute protective measures to provide a safe environment.</span></span></span></span></p><br> <p><span><span>The scope of responsibility, duties, and accountability at the facility department and position levels including knowledge and practice of the clinical/technical skills necessary to the position consistent with the Qatar Council for Healthcare Practitioners (QCHP) Anesthesia Technologist Scope of Practice. </span></span></p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p><span><span>Provides assistance with invasive and non-invasive techniques (excluding the catheter insertion) which includes the following: direct systemic arterial, right arterial, central venous and pulmonary artery pressure measurements, patient monitoring and set up for anesthetic and respiratory gas, blood draw and placing EKG electrodes, blood pressure cuff and pulse oximetry on the patient. </span></span></p><br> <p><span><span>Assists the licensed anesthesia provider in difficult airway intubation by providing video laryngoscopy equipment and/or fiber optic intubation scope as requested. Knowledgeable in the techniques used in securing an open airway, e.g., jaw thrust, jaw lift, or tongue hold.</span></span></p><br> <p><span><span>Executes the Malignant Hyperthermia protocol as it pertains to the preparation of the anesthesia machine.</span></span></p><br> <p><span><span>Awareness of appropriate procedure to properly respond to codes and initiate the proper procedures to assist the licensed anesthesia provider and OR staff.</span></span></p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p><span><span>Maintains, stocks, cleans and organizes anesthesia carts</span></span></p><br> <p><span><span>Maintains medications within their expiration date and properly disposes of unused portions or remnants in appropriate containers.</span></span></p><br> <p><span><span>Appropriately sets up the room with all equipment and supplies needed for the implementing plan of care for each patient procedure. Controls and maintains all perioperative anesthesia equipment and devices. Handles equipment and instruments correctly to provide appropriate availability and safety.</span></span></p><br> <p><span><span>Responsible for cleaning, sterilizing, disinfecting, stocking, ordering, and maintaining routine anesthesia equipment and supplies</span></span><span><span>.</span></span></p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p><span><span><span>Bachelor’s Degree in Anesthesia Technology (Preferred) OR</span></span></span></p><br> <p><span><span><span>B.SC in Nursing plus one year Anesthesia Diploma from recognized Anesthesia education institute / University OR</span></span></span></p><br> <p><span><span><span>Associates Degree or 2 years Diploma in Anesthesia technology</span></span></span></p><br> <p><span><span>Anesthesia Technologist (Minimum)</span></span></p><br> <p><span><span>Basic Life Support (BLS)&nbsp;(Minimum)</span></span></p><br> <p><span><span><span>Certified Anesthesia Technician (</span>Preferred<span>)</span></span></span></p><br> <p><span><span><span>Regulatory - Ability to interpret and apply knowledge of standards to comply with regulations</span></span></span></p><br> <p><span><span><span>Communication - Ability to convey and/or receive written/verbal information to/from various audiences in different formats</span></span></span></p><br> <p><span><span><span>Technical - Ability to operate mechanical/medical devices and/or equipment</span></span></span></p><br> <p><span><span><span>Management - Ability to address performance issues and implement corrective action plans</span></span></span></p><br> <p><span><span><span>Management - Ability to foster individual/team development, performance feedback, coaching and recognition</span></span></span></p><br> <p><span><span><span>Analytical - Ability to apply critical thinking to analyze and interpret information and/or data</span></span></span></p><br> <p><span><span><span>Quality - Ability to provide and/or support a level of work excellence and accuracy; recognize and address flaws or errors that others may overlook</span></span></span></p><br> <p><span><span><span>Management - Ability to motivate, monitor, measure, recognize and improve performance and morale</span></span></span></p><br> <br><br><u><b>Job Experience</b></u> <br><p><span><span><span>Candidates with Bachelor’s Degree in Anesthesia, 2 years’ experience (Preferred)</span></span></span></p><br> <p><span><span><span>Candidates with a Bachelor SC Nursing plus one year diploma in Anesthesia, 3 years post-graduation experience as an anesthesia technologist OR</span></span></span></p><br> <p><span><span><span>Candidates with 3 years Diploma in Anesthesia, 2 years post-graduation experience as Anesthesia Technologist OR</span></span></span></p><br> <p><span><span><span>Candidates with 2 years diploma in Anesthesia Technology a minimum of 4 years’ experience post qualification as an anesthesia technologist</span></span></span></p><br> <br><br><u><b>Competencies</b></u> <br>Agility<br>Anesthesia Equipment Checkup L2<br>Drug Distribution and Dispensing L2<br>Regulatory Compliance L2<br>Clinical Guidelines and Protocols L2<br>Preoperative Planning and Postoperative Care L2<br>AI Fluency<br>Leadership<br>Quality<br>Resilience<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Nursing or any Related Technical Certificates<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p><span><span><span><span>The Charge Nurse is an expert clinician who demonstrates a high level of knowledge and expertise in a specialty as well as general nursing. </span></span></span></span></p><br> <p><span><span><span><span>The Charge Nurse consistently demonstrates excellence in all areas of nursing practice including nursing care delivery, staff education, and collaboration. Evaluates and works to improve the process of patient care delivery within the unit. </span></span></span></span></p><br> <p><span><span><span><span>The Charge Nurse manages complex, unpredictable patient care situations and is a nursing shift leader. Serves as a clinical and operational resource to the nursing staff. The Charge Nurse serves as the mentor on the unit with the goal of increasing nurse engagement, professional development of their staff, and safe quality care with improved outcomes.</span></span></span></span></p><br> <p><span><span>The scope of responsibility, duties and accountability at the facility department and position levels including knowledge and practice of the clinical/technical skills necessary to the position consistent with the Qatar Council for Healthcare Practitioners (QCHP) Nursing/Midwifery Competency Framework and Scope of Practice. Nursing job duties are to meet the Joint Commission International and the Plan of Care, and other regulatory requirements.</span></span></p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p><span><span><span><span><span><span><span>Identifies and assesses patient safety concerns with respect to age and developmental considerations. Intervenes to provide a safe environment and evaluates effectiveness of intervention for patient.</span></span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span><span>Provides expert comprehensive direct and indirect care to the specific populations needs, including cultural, spiritual, age, psychosocial, communication, gender, sexual orientation, economic, education, family, and condition needs.</span></span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span><span>Provides expert comprehensive direct and indirect care to the specific populations needs, including cultural, spiritual, age, psychosocial, communication, gender, sexual orientation, economic, education, family, and condition needs.</span></span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span><span>Provides advanced assessment skills, integrating appropriate data sources to assess the signs, symptoms, reactions, behaviors, or general appearance to determine normal versus abnormal characteristics.</span></span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span><span>Evaluates and works to improve the process of patient care delivery within the unit.</span></span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span><span>Performs skin tests, immunizations, phlebotomy, and the initiation of peripheral venous access.</span></span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span>Serves as a clinical and operational resource for all nursing activities in the department. Provides assistance to co-workers, new staff, temporary staff and students.</span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span><span>Delegates and assigns tasks to health care workers within the scope of their job responsibilities.</span></span></span></span></span></span></span></p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p><span><span><span><span><span><span><span>Evaluates, facilitates, and promotes patient flow, coordinates discharge planning and team rounding.</span></span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span><span>Participates in the completion of required competencies.</span></span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span><span>Champions department improvement activities.</span></span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span><span>Assumes responsibility for mentoring, coaching and staff development. Contributes to performance evaluations.</span></span></span></span></span></span></span></p><br> <p><span><span><span><span><span><span><span>Coaches and supports nursing staff in the application of advanced clinical skills and critical thinking to support patient.</span></span></span></span></span></span></span></p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>• Regulatory Ability to interpret and apply knowledge of standards to comply with regulationsCommunication Ability to convey and/or receive written/verbal information to/from various audiences in different formatsTechnical Ability to operate mechanical/medical devices and/or equipmentManagement Ability to translate strategic thinking into operational objectives and plansManagement Ability to foster individual/team development, performance feedback, coaching and recognitionAnalytical Ability to apply critical thinking to analyze and interpret information and/or dataQuality Ability to provide and/or support a level of work excellence and accuracy; recognize and address flaws or errors that others may overlookManagement Ability to motivate, monitor, measure, recognize and improve performance and morale</p><br> <p>• ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p><span><span><span>Minimum 10 years (required)</span></span></span></p><br> <p><span><span><span>Minimum 5 years as Charge Nurse</span></span></span></p><br> <p><span><span><span>Minimum 1 year in GCC (preferred)</span></span></span></p><br> <br><br><u><b>Competencies</b></u> <br>Resilience<br>Agility<br>Quality<br>Clinical Decision- Making L3<br>Leadership<br>Inventory Control and Record-Keeping L3<br>Patient Care and Management L3<br>Crisis Management L3<br>Clinical Expertise L3<br>AI Fluency<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Nursing<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p><span><span>The </span></span><span><span>Dialysis Technologist will undertake dialysis for renal patients alongside dialysis RNs, provide care associated with dialysis, daily maintenance of dialysis equipment and water purification systems, maintaining the proper buffer solutions for each patient on dialysis, applying quality assurance measures needed by department.</span></span></p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><ul> <li><span><span><span><span>Determines the supply and equipment as per the schedule of dialysis procedure.</span></span></span></span></li> <li><span><span><span><span>Prepares the machines for procedures including calibrating, testing and monitoring dialysis equipment.</span></span></span></span></li> <li><span><span><span><span>Fixes and primes the extracorporeal circuit such as dialyzer, blood tubing for the appropriate dialysis procedure and performs the internal safety test.</span></span></span></span></li> <li><span><span><span><span>Prepares the specific dialysis solutions according to Nephrology physician orders.</span></span></span></span></li> <li><span><span><span><span>Checks hemodialysis solutions conductivity, PH, and electrolyte composition daily and records it, and corrects/reports any abnormal values.</span></span></span></span></li> <li><span><span><span><span>Obtains pharmaceutical supplies and equipment as requested by nephrologists.</span></span></span></span></li> <li><span><span><span><span>Connects patients to Hemodialysis and SLED and terminates the procedure at the end of the treatment.</span></span></span></span></li> <li><span><span><span><span>Sets up and prepares CRRT machine for treatment in critical care areas in different modalities such as CVVH, CVVHD, CVVHDF, and SCUF.</span></span></span></span></li> <li><span><span><span><span>Performs tests and procedures related to specific patient treatment such as UF profile, sodium profile, and single needle dialysis options.</span></span></span></span></li> <li><span><span><span><span>Continually monitors the machines functionality and patients’ vital signs when patient on hemodialysis and corrects any malfunction.</span></span></span></span></li> </ul> <p><span><span>Sets up and prepares dialysis machines and portable reverse osmosis units at bedside in different patient units including but not limited to critical care, oncology, pediatric units.</span></span></p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><ul> <li><span><span><span><span>Sets and administers anticoagulant for extracorporeal circuit per physician orders.</span></span></span></span></li> <li><span><span><span><span>Responds, alongside the registered charge nurses, to hypotension episodes during dialysis by administering IV fluids in the extracorporeal circuit according to physician orders.</span></span></span></span></li> <li><span><span><span><span>Continually maintains immediate availability to coordinate in the emergent events of hypo allergic reactions, hypovolemic shock, and emergency procedures including code blue.</span></span></span></span></li> <li><span><span><span><span>Maintains cleanliness of dialysis machines, internal and external disinfection after every care following procedures established by infection control team.</span></span></span></span></li> <li><span><span><span><span>Assists in the disinfection of the water treatment plant.</span></span></span></span></li> <li><span><span><span><span>Collects water sample for monthly test for dissolved chemicals, metals and microbiology.</span></span></span></span></li> <li><span><span><span><span>Tests the endotoxin level in the water and dialysis solutions and keeps records of results.</span></span></span></span></li> <li><span><span><span><span>Sets and makes ready the water treatment plant on daily basis by performing regeneration, back wash and tests the sample of chlorine, chloramine, and hardness of the product water.</span></span></span></span></li> <li><span><span><span><span>Calculates the urea reduction ration for each dialysis patient to maintain the adequacy of the treatment provided and submits report to nephrologist.</span></span></span></span></li> </ul> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><ul> <li><span><span><span>Knowledge of various dialysis techniques and protocols. </span></span></span></li> <li><span><span><span>Proficiency in setting up, operating, and monitoring dialysis machines.</span></span></span></li> <li><span><span><span>Understanding of kidney function and diseases.</span></span></span></li> <li><span><span><span>Familiarity with medical terminology and procedures related to dialysis.</span></span></span></li> <li><span><span><span>Knowledge of quality and safety standards and guidelines.</span></span></span></li> <li><span><span><span>Attention to detail and problem solving.</span></span></span></li> <li><span><span><span>Time management</span></span></span></li> </ul> <p><span><span>Physical endurance to stand for long periods and assist in lifting or positioning patients.</span></span></p><br> <br><br><u><b>Job Experience</b></u> <br><ul> <li><span><span><span>Overseas candidates:</span></span></span></li> </ul> <p><span><span><span>3 years’ experience as a Dialysis Technologist in a teaching hospital set up.</span></span></span></p><br> <p><span><span>For Qatari Nationals, Qatar Universities graduates, offspring of Qatari women or offspring of residents, please refer to the DHP Circular No.24/2020</span></span></p><br> <br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Dialysis Machine Operation L3<br>Dialysis treatment and techniques L3<br>Equipment Maintenance L3<br>Kidney function and diseases L3<br>Leadership<br>Patient Care L3<br>Quality<br>Resilience<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Science or Science<br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>To responsible all electrical activities related to installation, testing and commissioning of electrical equipment like distribution boards, modification in electrical Motor Control centers and power distribution panels etc.</p><p>Cable Tray/Electrical Piping works Cable Glanding, JB Termination, Conduit Work, Panel Work. Cable Dressing, Cable Meggering, Motor Connection. Wiring Motor Termination, Emergency Fire Alarm Wiring. Motor Star Delta Connection, Cable Pulling, Panel Erection, Cable Lying. Light Fitting, Meager Checking, Junction Box, Control Panel, MCC Gear Box PDB. Circuit Breaker, Local Control Panel. LT, TT, FT, PT, PDT, LDI, TE Connection, Control Valve, MOV, PSL, PSH, HPST, PST, ESDV, VT, HS Burner, Loop Testing, Instrument Installation Testing &amp; Commissioning. All Related Industrial Electrical &amp; Instrumentation Works Etc.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>All they must have an experience in the Oil and Gas, refinery project ITI/Diploma in Electrical Good knowledge in English</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The General Practitioner will develop an ongoing relationship with the patients, providing continuity of care, and focus on their overall health, physical and mental, to keep them healthy and out of the Hospital. </p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Performs his/ her duties under the direction of the Medical Director/CMO.&nbsp;</p><br> <p>Provides adequate quality care for the patients.&nbsp;</p><br> <p>Follows the standards of care.&nbsp;</p><br> <p>Ensures a safe environment for staff, patients, and visitors.&nbsp;</p><br> <p>Demonstrates commitment to Continued Medical Education (CME).&nbsp;</p><br> <p>Contributes with ideas that support efficient, effective, and quality care.&nbsp;</p><br> <p>Provides input into the preparation and consolidation of the Department’s budget, identifies areas of unsatisfactory performance (if any), and recommends mitigating actions.&nbsp;</p><br> <p>Contributes to developing policies and procedures, workflows, equipment, and clinical coverage for different hospital sitting around the clock.&nbsp;</p><br> <p>Ensures their work is performed and conducted in continuing compliance with the laws, regulations, and the highest standards of Compliance.&nbsp;</p><br> <p>Oversees the professional and ethical conduct of the Department’s staff.&nbsp;</p><br> <p>Liaises with other healthcare professionals (eg midwives, pharmacists, health visitors and psychiatrists) as part of multidisciplinary teams, to ensure the best patient care and patient experience. </p><br> <p>Provides input into the development and implementation of the Department’s policies, systems, processes, and procedures and identifies potential areas of improvement to support an efficient and effective patient care.&nbsp;</p><br> <p>Ensures compliance with all relevant organizational Health, Safety and Environment (HSE) and Quality Management (QM) policies, procedures, and controls across the department to guarantee employee safety, legislative compliance, delivery of high-quality service standards and a responsible environmental attitude.&nbsp;</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p>Treats acute and chronic illnesses and provides preventive care and health education to patients of all ages.&nbsp;</p><br> <p>Treats common medical conditions and performs routine exams.&nbsp;</p><br> <p>Provides confidential patient consultations and initial medical care.&nbsp;</p><br> <p>Assesses the patient with a physical exam and a review of their medical history.&nbsp;</p><br> <p>Orders additional tests, recommends treatment, or connects the patient with a specialist.&nbsp;</p><br> <p>Anticipates and responds to patients' wellness-related questions and concerns. </p><br> <p>interprets findings from investigations such as blood tests to help reach a diagnosis.&nbsp;</p><br> <p>Prescribes appropriate medications and lifestyle alterations. </p><br> <p>Refers the patients to other medical services or doctors if they need urgent or specialized treatment.&nbsp;</p><br> <p>Uses basic life support skills and emergency procedures such as defibrillation where necessary.&nbsp;</p><br> <p>Provides life-saving treatment in an emergency until emergency services arrive.&nbsp;</p><br> <p>Inspects and updates patients' records.&nbsp;</p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Strong Knowledge of General Medicine.&nbsp;</p><br> <p>Demonstrates advanced knowledge, skills, and abilities in GP practice. </p><br> <p>Ability to work long hours, often under pressure.&nbsp;</p><br> <p>Demonstrated ability to work within a matrix organization integrating knowledge of, and respect for, functions and reporting lines of other departments. </p><br> <p>High degree of self-organization, as well as highly successful communication, relationship, and engagement skills. </p><br> <p>Ability to spot and solve problems, requiring effective decision-making skills</p><br> <br><br><u><b>Job Experience</b></u> <br><p>5 years’ post graduate experience (Out of which 2 years in a government or semi-government Facility).</p><br> <p>Minimum 1 year of experience in GCC (preferred).</p><br> <br><br><u><b>Competencies</b></u> <br>Agility<br>Build High-Performing Teams<br>Patient Assessment L3<br>Provide Direction<br>Diagnostic Skills L3<br>Preventive Medicine L3<br>Chronic Disease Management L3<br>Good Medical Practice L3<br>AI Fluency<br>Leadership<br>Quality<br>Resilience<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Doctor of Medicine<br>Doctoral degree in Doctor of Medicine<br><br><br><br> </div>