Equipment operator Jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a skilled H-Beam Assembly Line Operator to assemble H-beams and structural steel members according to fabrication drawings, ensuring proper alignment, dimensional accuracy, and quality standards before welding. The ideal candidate should have experience operating H-beam assembly line equipment in a structural steel fabrication environment. Key Responsibilities Interpret fabrication and assembly drawings. Position web and flange plates for H-beam fabrication. Operate H-beam assembly line equipment, fixtures, and hydraulic systems. Check alignment, squareness, and dimensional accuracy. Perform tack welding or assist welders during assembly. Coordinate with fitters, welders, and quality inspectors. Report dimensional discrepancies and material issues. Follow workplace safety procedures and maintain housekeeping standards.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Job requirements</h2><p>Department: Production</p><p>Division: Fabrication</p><p>Category: Skilled Operator</p><h2>Qualification</h2><p>Technical Diploma or equivalent.</p><h2>Requirements</h2><ul><li>Minimum 2 5 years of experience in structural steel or heavy fabrication.</li><li>Experience operating automatic H-beam assembly production lines.</li><li>Knowledge of structural steel fabrication processes.</li><li>Ability to read and interpret fabrication drawings.</li><li>Familiarity with measuring tools and assembly equipment.</li><li>Good understanding of workplace safety practices.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Description <br></p><br><p>We are seeking a skilled <strong>H-Beam Assembly Line Operator</strong> to assemble H-beams and structural steel members according to fabrication drawings, ensuring proper alignment, dimensional accuracy, and quality standards before welding. The ideal candidate should have experience operating H-beam assembly line equipment in a structural steel fabrication environment.</p><br><br><strong>Key Responsibilities</strong><ul><li><p>Interpret fabrication and assembly drawings.</p><br><br></li><li><p>Position web and flange plates for H-beam fabrication.</p><br><br></li><li><p>Operate H-beam assembly line equipment, fixtures, and hydraulic systems.</p><br><br></li><li><p>Check alignment, squareness, and dimensional accuracy.</p><br><br></li><li><p>Perform tack welding or assist welders during assembly.</p><br><br></li><li><p>Coordinate with fitters, welders, and quality inspectors.</p><br><br></li><li><p>Report dimensional discrepancies and material issues.</p><br><br></li><li><p>Follow workplace safety procedures and maintain housekeeping standards.</p><br><br></li></ul>Requirements <br><p><strong>Department:</strong> Production<br><strong>Division:</strong> Fabrication<br><strong>Category:</strong> Skilled Operator</p><br><br><strong>Qualification</strong><ul><li><p>Technical Diploma or equivalent.</p><br><br></li></ul><strong>Requirements</strong><ul><li><p>Minimum <strong>2-5 years</strong> of experience in structural steel or heavy fabrication.</p><br><br></li><li><p>Experience operating automatic H-beam assembly production lines.</p><br><br></li><li><p>Knowledge of structural steel fabrication processes.</p><br><br></li><li><p>Ability to read and interpret fabrication drawings.</p><br><br></li><li><p>Familiarity with measuring tools and assembly equipment.</p><br><br></li><li><p>Good understanding of workplace safety practices.</p><br><br></li></ul><strong>Benefits</strong><ul><li><p>Visa Provided</p><br><br></li><li><p>Joining Ticket</p><br><br></li><li><p>Food &amp; Accommodation Provided</p><br><br></li><li><p>Medical (Government Hospital)</p><br><br></li><li><p>Leave Pay as per Libyan Labour Law</p><br><br></li><li><p>Return Air Ticket to Home Country</p><br><br></li><li><p>Overtime as per company policy</p><br><br></li></ul><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a skilled SAW Welding Operator to operate Submerged Arc Welding (SAW) machines for welding structural steel components in accordance with approved Welding Procedure Specifications (WPS) and quality standards. The ideal candidate should ensure high-quality welds, maintain welding accuracy, and comply with all safety and fabrication requirements. Key Responsibilities Set up and operate SAW welding equipment. Adjust welding parameters, including voltage, amperage, and travel speed. Weld H-beams, box sections, and structural steel components. Read and interpret welding symbols and fabrication drawings. Inspect welds for defects and ensure quality compliance. Perform routine machine maintenance and basic troubleshooting. Follow approved WPS (Welding Procedure Specification). Comply with welding standards, safety procedures, and PPE requirements. Job requirements Department: Production Division: Fabrication Category: Skilled Welder Qualification Technical Certificate in Welding or related field. Requirements Minimum 3 5 years of SAW welding experience. Experience in structural steel fabrication plants. Knowledge of SAW welding processes and welding standards. Familiarity with AWS, ISO, or other relevant welding standards. Ability to read welding drawings, symbols, and WPS. Knowledge of weld inspection requirements and quality control.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><b>Qualification </b>Technical Certificate in Welding or related field. Requirements Minimum 3 5 years of SAW welding experience. Experience in structural steel fabrication plants. Knowledge of SAW welding processes and welding standards. Familiarity with AWS, ISO, or other relevant welding standards. Ability to read welding drawings, symbols, and WPS. Knowledge of weld inspection requirements and quality control.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Description <br></p><br><p>We are seeking a skilled <strong>CNC Cutting Table Operator</strong> to operate CNC plasma, oxy-fuel, or laser cutting machines for cutting steel plates, beams, and structural materials as per engineering drawings and production requirements. The candidate must ensure cutting accuracy, machine efficiency, and compliance with safety and quality standards.</p><br><br><p><strong>Key Responsibilities</strong></p><br><br><ul><li><p>Operate CNC plasma, oxy-fuel, or laser cutting machines.</p><br><br></li><li><p>Read and interpret engineering drawings and nesting plans.</p><br><br></li><li><p>Load raw materials onto the cutting table.</p><br><br></li><li><p>Monitor cutting quality and machine performance.</p><br><br></li><li><p>Verify dimensions and cutting accuracy using measuring tools.</p><br><br></li><li><p>Perform routine machine cleaning and basic maintenance.</p><br><br></li><li><p>Record production data and material usage.</p><br><br></li><li><p>Follow safety procedures and maintain housekeeping standards.</p><br><br></li></ul>Requirements <br><p><strong>Department:</strong> Production<br><strong>Division:</strong> Fabrication<br><strong>Category:</strong> Skilled Operator</p><br><br><p><strong>Qualification</strong></p><br><br><ul><li><p>High School, ITI, or Technical Diploma.</p><br><br></li></ul><p><strong>Requirements</strong></p><br><br><ul><li><p>Minimum <strong>2-5 years</strong> of experience in steel fabrication or manufacturing.</p><br><br></li><li><p>Experience operating CNC plasma or oxy-fuel cutting systems.</p><br><br></li><li><p>Ability to read and understand fabrication drawings.</p><br><br></li><li><p>Knowledge of measuring instruments and quality inspection.</p><br><br></li></ul><p><strong>Benefits</strong></p><br><br><ul><li><p>Visa Provided</p><br><br></li><li><p>Joining Ticket</p><br><br></li><li><p>Food &amp; Accommodation Provided</p><br><br></li><li><p>Medical (Government Hospital)</p><br><br></li><li><p>Leave Pay as per Libyan Labour Law</p><br><br></li><li><p>Return Air Ticket to Home Country</p><br><br><br></li></ul><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job description</p><p>Responsibilities:</p><p><br></p><p>Collaborate with design team on new product development</p><p>Ensure quality control through regular inspections</p><p>Set up, operate &amp; maintain injection molding equipment</p><p>Role: Foreman / Technician</p><p>Industry Type: Petrochemical / Plastics / Rubber</p><p>Department: Production, Manufacturing &amp; Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Operations, Maintenance &amp; Support</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Experience in operating and maintaining injection molding equipment.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a skilled CNC Cutting Table Operator to operate CNC plasma, oxy-fuel, or laser cutting machines for cutting steel plates, beams, and structural materials as per engineering drawings and production requirements. The candidate must ensure cutting accuracy, machine efficiency, and compliance with safety and quality standards. Key Responsibilities Operate CNC plasma, oxy-fuel, or laser cutting machines. Read and interpret engineering drawings and nesting plans. Load raw materials onto the cutting table. Monitor cutting quality and machine performance. Verify dimensions and cutting accuracy using measuring tools. Perform routine machine cleaning and basic maintenance. Record production data and material usage. Follow safety procedures and maintain housekeeping standards.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Qualification High School, ITI, or Technical Diploma. Requirements Minimum 2 5 years of experience in steel fabrication or manufacturing. Experience operating CNC plasma or oxy-fuel cutting systems. Ability to read and understand fabrication drawings. Knowledge of measuring instruments and quality inspection.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>One of the leading construction companies in Benghazi, Libya is currently looking for Road and Bridges Construction workers to join its growing team. The company is hiring for various positions, including <b>Machine Operators </b>(Road Roller Operators, Excavator Operators, JCB Operators, Bobcat Operators). Candidates with relevant experience in construction and infrastructure projects are encouraged to apply. The salary package and other employment benefits will also be discussed during the interview.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>The specific job roles, responsibilities, and position assignments will be discussed during the interview process based on the candidate’s qualifications and experience.Interested applicants are invited to submit their CVs for consideration.</p></div>

فني تشغيل ماكينات مقصات بلاستيك (تفصيل)أولاً: المهام التشغيلية الأساسيةالاستلام والتجهيزاستلام لفات (بكرات) البلاستيك الخام من المستودع أو من قسم الطباعة/النفخ حسب مراحل الإنتاجالتأكد من مطابقة نوع ومقاس ولون اللفة لأمر الإنتاجتركيب اللفة على الماكينة والتأكد من استقامة تغذية المادة (Web Alignment)ضبط الماكينة قبل التشغيلضبط مقاسات القطع (الطول والعرض) حسب المواصفات المطلوبةضبط درجة حرارة سكاكين اللحام/القطع الحراري (Sealing/Cutting Temperature)ضبط سرعة الماكينة بما يتناسب مع سُمك المادة ونوعهامعايرة نظام العين الكهربائية (Photocell) لضبط تزامن القطع مع الطباعة إن وجدتتشغيل الماكينة ومتابعة الإنتاجتشغيل الماكينة ومراقبة الدورة الأولى للتأكد من دقة القطع واللحامالمراقبة المستمرة لجودة الأكياس الناتجة (استقامة القطع، تماسك اللحام، خلو الأكياس من الثقوب أو التمزق)سحب عينات دورية للفحص ومطابقتها بمواصفات الجودةتسجيل كميات الإنتاج الفعلي مقابل الكميات المستهدفةثانياً: الصيانة والسلامةالصيانة الدورية (الوقائية)تنظيف السكاكين والقوالب الحرارية بعد كل وردية عملفحص أحزمة السحب (Feeding Belts) والبكرات للتأكد من عدم تآكلهاتشحيم الأجزاء الميكانيكية المتحركة حسب جدول الصيانةالإبلاغ الفوري عن أي أعطال أو أصوات غير طبيعية لقسم الصيانةمتطلبات السلامة المهنيةارتداء معدات الوقاية الشخصية (قفازات، نظارات، كمامة عند الحاجة)إيقاف الماكينة بالكامل قبل إجراء أي تدخل يدوي بالقرب من السكاكينالالتزام بعدم إدخال اليد في منطقة القطع أثناء التشغيلالمحافظة على نظافة وترتيب منطقة العمل لتفادي الانزلاق أو التعثرثالثاً: الجودة والتوثيقضبط الجودةالتأكد من مطابقة الوزن (الجرامات) للكيس مع المواصفة المعتمدةرفض ومعالجة الإنتاج غير المطابق (Reject) وتسجيل نسبة الهالكالتعامل الفوري مع أي انحراف في مقاس القطع أو ضعف اللحام بإعادة الضبطالتوثيق والتقاريرتعبئة سجل الإنتاج اليومي (الكمية، الهالك، وقت التوقف إن وجد)تسجيل بيانات كل أمر إنتاج (رقم الأمر، المقاس، الكمية، التاريخ)تسليم تقرير الوردية لرئيس القسم أو المشرف المباشررابعاً: مسئوليات إضافيةتدريب العمال المساعدين على أساسيات التغذية والتعبئة بجانب الماكينةالمشاركة في جرد المواد الخام والمنتج التام بشكل دوريالالتزام بأوامر الإنتاج وتسلسل الأولويات كما يحددها المشرفالحفاظ على الماكينة وملحقاتها وعدم تشغيلها من قبل غير المخول لهم<p><strong>تفاصيل إضافية</strong></p><ul><li>عدد الشواغر: 2</li><li>نظام الورديات: صباحية و مسائية</li><li>المزايا: بدل انتقال، وجبات، سكن، ساعات إضافية</li></ul>

فني تشغيل ماكينات مقصات بلاستيك (تفصيل)<br>أولاً: المهام التشغيلية الأساسية<br><br>الاستلام والتجهيز<br><br>استلام لفات (بكرات) البلاستيك الخام من المستودع أو من قسم الطباعة/النفخ حسب مراحل الإنتاج<br>التأكد من مطابقة نوع ومقاس ولون اللفة لأمر الإنتاج<br>تركيب اللفة على الماكينة والتأكد من استقامة تغذية المادة (Web Alignment)<br><br><br>ضبط الماكينة قبل التشغيل<br><br>ضبط مقاسات القطع (الطول والعرض) حسب المواصفات المطلوبة<br>ضبط درجة حرارة سكاكين اللحام/القطع الحراري (Sealing/Cutting Temperature)<br>ضبط سرعة الماكينة بما يتناسب مع سُمك المادة ونوعها<br>معايرة نظام العين الكهربائية (Photocell) لضبط تزامن القطع مع الطباعة إن وجدت<br><br><br>تشغيل الماكينة ومتابعة الإنتاج<br><br>تشغيل الماكينة ومراقبة الدورة الأولى للتأكد من دقة القطع واللحام<br>المراقبة المستمرة لجودة الأكياس الناتجة (استقامة القطع، تماسك اللحام، خلو الأكياس من الثقوب أو التمزق)<br>سحب عينات دورية للفحص ومطابقتها بمواصفات الجودة<br>تسجيل كميات الإنتاج الفعلي مقابل الكميات المستهدفة<br><br><br><br>ثانياً: الصيانة والسلامة<br><br>الصيانة الدورية (الوقائية)<br><br>تنظيف السكاكين والقوالب الحرارية بعد كل وردية عمل<br>فحص أحزمة السحب (Feeding Belts) والبكرات للتأكد من عدم تآكلها<br>تشحيم الأجزاء الميكانيكية المتحركة حسب جدول الصيانة<br>الإبلاغ الفوري عن أي أعطال أو أصوات غير طبيعية لقسم الصيانة<br><br><br>متطلبات السلامة المهنية<br><br>ارتداء معدات الوقاية الشخصية (قفازات، نظارات، كمامة عند الحاجة)<br>إيقاف الماكينة بالكامل قبل إجراء أي تدخل يدوي بالقرب من السكاكين<br>الالتزام بعدم إدخال اليد في منطقة القطع أثناء التشغيل<br>المحافظة على نظافة وترتيب منطقة العمل لتفادي الانزلاق أو التعثر<br><br><br><br>ثالثاً: الجودة والتوثيق<br><br>ضبط الجودة<br><br>التأكد من مطابقة الوزن (الجرامات) للكيس مع المواصفة المعتمدة<br>رفض ومعالجة الإنتاج غير المطابق (Reject) وتسجيل نسبة الهالك<br>التعامل الفوري مع أي انحراف في مقاس القطع أو ضعف اللحام بإعادة الضبط<br><br><br>التوثيق والتقارير<br><br>تعبئة سجل الإنتاج اليومي (الكمية، الهالك، وقت التوقف إن وجد)<br>تسجيل بيانات كل أمر إنتاج (رقم الأمر، المقاس، الكمية، التاريخ)<br>تسليم تقرير الوردية لرئيس القسم أو المشرف المباشر<br><br><br><br>رابعاً: مسئوليات إضافية<br><br>تدريب العمال المساعدين على أساسيات التغذية والتعبئة بجانب الماكينة<br>المشاركة في جرد المواد الخام والمنتج التام بشكل دوري<br>الالتزام بأوامر الإنتاج وتسلسل الأولويات كما يحددها المشرف<br>الحفاظ على الماكينة وملحقاتها وعدم تشغيلها من قبل غير المخول لهم

<p>Under general supervision, provides well site service to customers. Applies content learned through the formal training program in fluids chemistry, volume and hydraulics calculations, routine and specialized testing, separation equipment theory and application, and well site service delivery. Conducts and interprets results of routine and specialized testing in order to provide technical solutions. Operates separation and waste management equipment and demonstrates understanding of the affect on overall fluid performance. Works directly with both fluids and equipment supervisors and technical professionals. Demonstrates knowledge of company products and services, rig operations; fluids, separation, and waste management technologies and related processes. Performs in a professional manner as a Halliburton representative, maintaining a good working relationship with the operator&amp;aposs representatives and rig personnel. Demonstrates the ability to adequately prepare and track inventory of Baroid products and equipment spares at the rig site based on the drilling program and anticipated conditions. Complies with health, safety and environment regulations in all aspects of job performance. </p><p>Requisition Number: PHONE_NUMBER</p><p>Experience Level: Experienced Hire</p><p>Job Family: Operations</p><p>Product Service Line: [[division]]</p><p>Full Time / Part Time: Full Time</p><p>Additional Locations for this position:</p><p>Compensation Information</p><p>Compensation is competitive and commensurate with experience.</p><p><strong>Desired Candidate Profile</strong></p><p>High school diploma or equivalent required. Completion of a Bachelor&amp;aposs Degree in STEM (Science, Technology, Engineering and Mathematics) or other related Bachelor&amp;aposs Degree program is preferred. This position requires completion of the Baroid Core Training Course at Halliburton or other industry recognized program, and 6 months related experience.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>experience in maintenance and troubleshooting of Package units, Split A/C, Ducted A/C units, Window A/C, Ventilation fans, installation of new HVAC equipment when required</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>4~5 years experience of which gulf area is inclusive, driving license</li><li>experience in maintenance and troubleshooting of Package units, Split A/C, Ducted A/C units, Window A/C, Ventilation fans, installation of new HVAC equipment when required</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking an experienced Industrial Electrician to install, troubleshoot, repair, and maintain industrial electrical systems, workshop equipment, generators, motors, control panels, and industrial machinery used in workshop and field operations. The ideal candidate should have strong fault-finding skills and ensure the safe and reliable operation of all electrical equipment. Key Responsibilities Troubleshoot and repair electrical faults in industrial machines and workshop equipment. Maintain motors, generators, MCC panels, control panels, breakers, and power distribution systems. Install and repair industrial wiring, cable trays, lighting, and electrical connections. Diagnose faults in old industrial machinery and electrical systems. Perform preventive and breakdown maintenance activities. Test motors, circuits, and electrical components using appropriate testing equipment. Support workshop startup, commissioning, and field maintenance activities. Maintain electrical tools and follow lockout/tagout (LOTO) and safety procedures.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h3>Job requirements</h3><p>Department: Maintenance Division: Electrical Maintenance Category: Skilled Technician Qualification Diploma or Technical Certification in Electrical or Industrial Electrical Technology.</p><p>Requirements</p><ul><li>Minimum 5+ years of industrial electrical maintenance experience.</li><li>Experience maintaining old industrial machines and workshop equipment.</li><li>Strong knowledge of motors, generators, MCC panels, contactors, relays, breakers, and industrial wiring.</li><li>Ability to read and interpret electrical drawings and troubleshoot electrical faults.</li><li>Hands-on experience using multimeter, clamp meter, insulation tester, and other electrical diagnostic tools.</li><li>Oil &amp; Gas or industrial workshop experience preferred.</li><li>Willingness to work in Libya and remote project locations.</li></ul><p>Preferred</p><ul><li>Experience with generators and rotating equipment.</li><li>Basic PLC troubleshooting knowledge.</li><li>Experience in Oil &amp; Gas, marine, or heavy industry.</li><li>Basic English communication skills.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Operate and monitor RO systems, pumps, filters, valves, and other desalination plant equipment. Perform routine inspections, preventive maintenance, and troubleshooting to ensure efficient plant operation. Monitor water quality parameters and maintain accurate operational and maintenance records. Replace filters, membranes, and other consumables while ensuring proper chemical dosing and equipment performance. Follow HSE procedures and report equipment faults or abnormalities to the supervisor promptly</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Diploma/ITI in Mechanical, Electrical, Instrumentation, or a related technical field with experience in desalination or water treatment plant operations.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p><span><span><span><span>The Anesthesia Technologist assists the licensed anesthesia provider in the acquisition, preparation and application of equipment and supplies required for the administration of anesthesia. Is committed to customer service and has the ability to meet the needs and expectations of healthcare colleagues and patients, adapts well and is flexible to changing situations, and demonstrates effective communication and teamwork skills. Provides support in anesthesia for routine and complex surgical cases by preparing and maintaining patient monitoring devices and anesthesia delivery systems before, during, and after anesthesia. Responsibilities include but are not limited to assisting the licensed anesthesia provider in various settings, performing duties under the direct supervision of the licensed anesthesia provider, and providing support for routine surgical cases. Identifies safety concerns in the age-related population and is able to institute protective measures to provide a safe environment.</span></span></span></span></p><br> <p><span><span>The scope of responsibility, duties, and accountability at the facility department and position levels including knowledge and practice of the clinical/technical skills necessary to the position consistent with the Qatar Council for Healthcare Practitioners (QCHP) Anesthesia Technologist Scope of Practice. </span></span></p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p><span><span>Provides assistance with invasive and non-invasive techniques (excluding the catheter insertion) which includes the following: direct systemic arterial, right arterial, central venous and pulmonary artery pressure measurements, patient monitoring and set up for anesthetic and respiratory gas, blood draw and placing EKG electrodes, blood pressure cuff and pulse oximetry on the patient. </span></span></p><br> <p><span><span>Assists the licensed anesthesia provider in difficult airway intubation by providing video laryngoscopy equipment and/or fiber optic intubation scope as requested. Knowledgeable in the techniques used in securing an open airway, e.g., jaw thrust, jaw lift, or tongue hold.</span></span></p><br> <p><span><span>Executes the Malignant Hyperthermia protocol as it pertains to the preparation of the anesthesia machine.</span></span></p><br> <p><span><span>Awareness of appropriate procedure to properly respond to codes and initiate the proper procedures to assist the licensed anesthesia provider and OR staff.</span></span></p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p><span><span>Maintains, stocks, cleans and organizes anesthesia carts</span></span></p><br> <p><span><span>Maintains medications within their expiration date and properly disposes of unused portions or remnants in appropriate containers.</span></span></p><br> <p><span><span>Appropriately sets up the room with all equipment and supplies needed for the implementing plan of care for each patient procedure. Controls and maintains all perioperative anesthesia equipment and devices. Handles equipment and instruments correctly to provide appropriate availability and safety.</span></span></p><br> <p><span><span>Responsible for cleaning, sterilizing, disinfecting, stocking, ordering, and maintaining routine anesthesia equipment and supplies</span></span><span><span>.</span></span></p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p><span><span><span>Bachelor’s Degree in Anesthesia Technology (Preferred) OR</span></span></span></p><br> <p><span><span><span>B.SC in Nursing plus one year Anesthesia Diploma from recognized Anesthesia education institute / University OR</span></span></span></p><br> <p><span><span><span>Associates Degree or 2 years Diploma in Anesthesia technology</span></span></span></p><br> <p><span><span>Anesthesia Technologist (Minimum)</span></span></p><br> <p><span><span>Basic Life Support (BLS)&nbsp;(Minimum)</span></span></p><br> <p><span><span><span>Certified Anesthesia Technician (</span>Preferred<span>)</span></span></span></p><br> <p><span><span><span>Regulatory - Ability to interpret and apply knowledge of standards to comply with regulations</span></span></span></p><br> <p><span><span><span>Communication - Ability to convey and/or receive written/verbal information to/from various audiences in different formats</span></span></span></p><br> <p><span><span><span>Technical - Ability to operate mechanical/medical devices and/or equipment</span></span></span></p><br> <p><span><span><span>Management - Ability to address performance issues and implement corrective action plans</span></span></span></p><br> <p><span><span><span>Management - Ability to foster individual/team development, performance feedback, coaching and recognition</span></span></span></p><br> <p><span><span><span>Analytical - Ability to apply critical thinking to analyze and interpret information and/or data</span></span></span></p><br> <p><span><span><span>Quality - Ability to provide and/or support a level of work excellence and accuracy; recognize and address flaws or errors that others may overlook</span></span></span></p><br> <p><span><span><span>Management - Ability to motivate, monitor, measure, recognize and improve performance and morale</span></span></span></p><br> <br><br><u><b>Job Experience</b></u> <br><p><span><span><span>Candidates with Bachelor’s Degree in Anesthesia, 2 years’ experience (Preferred)</span></span></span></p><br> <p><span><span><span>Candidates with a Bachelor SC Nursing plus one year diploma in Anesthesia, 3 years post-graduation experience as an anesthesia technologist OR</span></span></span></p><br> <p><span><span><span>Candidates with 3 years Diploma in Anesthesia, 2 years post-graduation experience as Anesthesia Technologist OR</span></span></span></p><br> <p><span><span><span>Candidates with 2 years diploma in Anesthesia Technology a minimum of 4 years’ experience post qualification as an anesthesia technologist</span></span></span></p><br> <br><br><u><b>Competencies</b></u> <br>Agility<br>Anesthesia Equipment Checkup L2<br>Drug Distribution and Dispensing L2<br>Regulatory Compliance L2<br>Clinical Guidelines and Protocols L2<br>Preoperative Planning and Postoperative Care L2<br>AI Fluency<br>Leadership<br>Quality<br>Resilience<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Nursing or any Related Technical Certificates<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p><span><span>The </span></span><span><span>Dialysis Technologist will undertake dialysis for renal patients alongside dialysis RNs, provide care associated with dialysis, daily maintenance of dialysis equipment and water purification systems, maintaining the proper buffer solutions for each patient on dialysis, applying quality assurance measures needed by department.</span></span></p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><ul> <li><span><span><span><span>Determines the supply and equipment as per the schedule of dialysis procedure.</span></span></span></span></li> <li><span><span><span><span>Prepares the machines for procedures including calibrating, testing and monitoring dialysis equipment.</span></span></span></span></li> <li><span><span><span><span>Fixes and primes the extracorporeal circuit such as dialyzer, blood tubing for the appropriate dialysis procedure and performs the internal safety test.</span></span></span></span></li> <li><span><span><span><span>Prepares the specific dialysis solutions according to Nephrology physician orders.</span></span></span></span></li> <li><span><span><span><span>Checks hemodialysis solutions conductivity, PH, and electrolyte composition daily and records it, and corrects/reports any abnormal values.</span></span></span></span></li> <li><span><span><span><span>Obtains pharmaceutical supplies and equipment as requested by nephrologists.</span></span></span></span></li> <li><span><span><span><span>Connects patients to Hemodialysis and SLED and terminates the procedure at the end of the treatment.</span></span></span></span></li> <li><span><span><span><span>Sets up and prepares CRRT machine for treatment in critical care areas in different modalities such as CVVH, CVVHD, CVVHDF, and SCUF.</span></span></span></span></li> <li><span><span><span><span>Performs tests and procedures related to specific patient treatment such as UF profile, sodium profile, and single needle dialysis options.</span></span></span></span></li> <li><span><span><span><span>Continually monitors the machines functionality and patients’ vital signs when patient on hemodialysis and corrects any malfunction.</span></span></span></span></li> </ul> <p><span><span>Sets up and prepares dialysis machines and portable reverse osmosis units at bedside in different patient units including but not limited to critical care, oncology, pediatric units.</span></span></p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><ul> <li><span><span><span><span>Sets and administers anticoagulant for extracorporeal circuit per physician orders.</span></span></span></span></li> <li><span><span><span><span>Responds, alongside the registered charge nurses, to hypotension episodes during dialysis by administering IV fluids in the extracorporeal circuit according to physician orders.</span></span></span></span></li> <li><span><span><span><span>Continually maintains immediate availability to coordinate in the emergent events of hypo allergic reactions, hypovolemic shock, and emergency procedures including code blue.</span></span></span></span></li> <li><span><span><span><span>Maintains cleanliness of dialysis machines, internal and external disinfection after every care following procedures established by infection control team.</span></span></span></span></li> <li><span><span><span><span>Assists in the disinfection of the water treatment plant.</span></span></span></span></li> <li><span><span><span><span>Collects water sample for monthly test for dissolved chemicals, metals and microbiology.</span></span></span></span></li> <li><span><span><span><span>Tests the endotoxin level in the water and dialysis solutions and keeps records of results.</span></span></span></span></li> <li><span><span><span><span>Sets and makes ready the water treatment plant on daily basis by performing regeneration, back wash and tests the sample of chlorine, chloramine, and hardness of the product water.</span></span></span></span></li> <li><span><span><span><span>Calculates the urea reduction ration for each dialysis patient to maintain the adequacy of the treatment provided and submits report to nephrologist.</span></span></span></span></li> </ul> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><ul> <li><span><span><span>Knowledge of various dialysis techniques and protocols. </span></span></span></li> <li><span><span><span>Proficiency in setting up, operating, and monitoring dialysis machines.</span></span></span></li> <li><span><span><span>Understanding of kidney function and diseases.</span></span></span></li> <li><span><span><span>Familiarity with medical terminology and procedures related to dialysis.</span></span></span></li> <li><span><span><span>Knowledge of quality and safety standards and guidelines.</span></span></span></li> <li><span><span><span>Attention to detail and problem solving.</span></span></span></li> <li><span><span><span>Time management</span></span></span></li> </ul> <p><span><span>Physical endurance to stand for long periods and assist in lifting or positioning patients.</span></span></p><br> <br><br><u><b>Job Experience</b></u> <br><ul> <li><span><span><span>Overseas candidates:</span></span></span></li> </ul> <p><span><span><span>3 years’ experience as a Dialysis Technologist in a teaching hospital set up.</span></span></span></p><br> <p><span><span>For Qatari Nationals, Qatar Universities graduates, offspring of Qatari women or offspring of residents, please refer to the DHP Circular No.24/2020</span></span></p><br> <br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Dialysis Machine Operation L3<br>Dialysis treatment and techniques L3<br>Equipment Maintenance L3<br>Kidney function and diseases L3<br>Leadership<br>Patient Care L3<br>Quality<br>Resilience<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Science or Science<br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job Description:</b></p><p>Must have Construction &amp; Facility management service experience.</p><p>A minimum around 5 years Gulf experience is mandatory.</p><p>Diploma or bachelor’s degree in Mechanical Engineering or relevant certifications.</p><p>Ability to operate power tools, gauges, and diagnostic or specialized equipment.</p><p><b>Knowledge &amp; Qualification:</b></p><p>N/A</p><p><b>Role &amp; Responsibilities:</b></p><p>Ability to understand and follow oral and written instructions.</p><p>Ability to work cooperatively and collaboratively with co-workers, architects/engineers and other professionals.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are Project Manager Office with a SPT Public Company for 30,000 m3/day Waste Water Treatment Plant Project. We need a experienced civil structural engineer for follow up the activities as per owner request and having correspondance ability and experience in need of daily correspondnce with contracter and owner according to the site conditions. Since it is a water structure,very sensitive for the insulation practice and leakage protection precautions.Candidates should have treatment plant construction experience min 10 years.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Experience ,min 10 years.</p><p>Min.intermediate level of English,spoken,writing.</p><p>Team player with strong communication skill.</p><p>Having real practice experience for coordination with mechanical equipment works and electrical works.</p><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> About the Hiring Company:<p><span>The company is a Libyan EPC/EPCM and energy infrastructure company specialized in power generation, electrical infrastructure, renewable energy, industrial engineering, and large-scale infrastructure projects. The company combines international engineering expertise with local operational capability to support Libya’s energy transition and infrastructure modernization initiatives.</span></p><br>Your Mission as a Tender &amp;amp; Business Development Officer:<p><span>As a Tender &amp;amp; Business Development Officer, your mission </span>will be responsible for identifying, monitoring, and pursuing business opportunities with Libyan government entities, particularly the National Oil Corporation (NOC), its affiliated companies, the General Electricity Company of Libya (GECOL), and other public sector organizations. </p><br><p>The role focuses on securing supply contracts for spare parts, industrial equipment, electrical and mechanical materials, engineering products, and related technical services.</p><br>You Will Be Handling These Duties and Responsibilities as a Tender &amp;amp; Business Development Officer:<ul><li><p><span>Monitor tender opportunities issued by NOC, NOC subsidiaries, GECOL, government ministries, and public institutions.</span></p><br></li><li><p><span>Identify and pursue new business opportunities related to spare parts, industrial equipment, electrical equipment, mechanical equipment, engineering materials, and technical services.</span></p><br></li><li><p><span>Build and maintain strong relationships with procurement, contracts, and commercial departments within government entities and state-owned companies.</span></p><br></li><li><p><span>Register and maintain the company’s vendor and qualification status with target organizations.</span></p><br></li><li><p><span>Coordinate with technical, commercial, and supplier teams to prepare competitive technical and commercial proposals.</span></p><br></li><li><p><span>Manage the tender process from bid preparation and submission to clarification, negotiation, follow-up, and contract award.</span></p><br></li><li><p><span>Communicate with local and international suppliers to obtain quotations, technical documents, and commercial offers.</span></p><br></li><li><p><span>Maintain a pipeline of upcoming tenders and business opportunities and provide regular updates to management.</span></p><br></li><li><p><span>Support contract negotiations and coordinate internally during contract execution.</span></p><br></li><li><p><span>Identify strategic suppliers and partnerships that can strengthen the company’s competitiveness.</span></p><br></li></ul>Qualifications and Skills That Will Allow You to Thrive as a Tender &amp;amp; Business Development Officer:<ul><li><p><span>Minimum 3–5 years of experience in tendering, business development, procurement, or commercial activities.</span></p><br></li><li><p><span>Bachelor’s degree in Engineering, Business Administration, Marketing, or a related field.</span></p><br></li><li><p><span>Previous experience with NOC companies, GECOL, EPC contractors, or industrial supply companies is highly preferred.</span></p><br></li><li><p><span>Strong understanding of Libyan public procurement procedures, tender requirements, and vendor registration processes.</span></p><br></li><li><p><span>Good network with procurement, contracts, and commercial teams within government or state-owned organizations.</span></p><br></li><li><p><span>Experience in sourcing spare parts, industrial equipment, electrical and mechanical materials from local and international suppliers.</span></p><br></li><li><p><span>Strong commercial awareness and ability to identify and convert opportunities into business relationships and contracts.</span></p><br></li><li><p><span>Excellent negotiation, communication, reporting, and presentation skills.</span></p><br></li><li><p><span>Excellent command of Arabic and English.</span></p><br></li><li><p><span>Good knowledge of Microsoft Office applications.</span></p><br></li><li><p><span>High level of integrity, professionalism, confidentiality, and follow-up discipline.</span></p><br></li><li><p><span>Willingness to travel within Libya when required.</span></p><br></li></ul>Additional Information<ul><li><p><strong>Working Days &amp;amp; Hours: </strong>Saturday to Thursday (8:00 AM – 3:00 PM)</p><br></li><li><p><strong>Location: </strong><span>Ben Ashour, </span>Tripoli, Libya.</p><br></li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Description <br></p><br><p>We are seeking an experienced <strong>Industrial Electrician</strong> to install, troubleshoot, repair, and maintain industrial electrical systems, workshop equipment, generators, motors, control panels, and industrial machinery used in workshop and field operations. The ideal candidate should have strong fault-finding skills and ensure the safe and reliable operation of all electrical equipment.</p><br><br><strong>Key Responsibilities</strong><ul><li><p>Troubleshoot and repair electrical faults in industrial machines and workshop equipment.</p><br><br></li><li><p>Maintain motors, generators, MCC panels, control panels, breakers, and power distribution systems.</p><br><br></li><li><p>Install and repair industrial wiring, cable trays, lighting, and electrical connections.</p><br><br></li><li><p>Diagnose faults in old industrial machinery and electrical systems.</p><br><br></li><li><p>Perform preventive and breakdown maintenance activities.</p><br><br></li><li><p>Test motors, circuits, and electrical components using appropriate testing equipment.</p><br><br></li><li><p>Support workshop startup, commissioning, and field maintenance activities.</p><br><br></li><li><p>Maintain electrical tools and follow lockout/tagout (LOTO) and safety procedures.</p><br><br></li></ul>Requirements <br><p><strong>Department:</strong> Maintenance<br><strong>Division:</strong> Electrical Maintenance<br><strong>Category:</strong> Skilled Technician</p><br><br><strong>Qualification</strong><ul><li><p>Diploma or Technical Certification in Electrical or Industrial Electrical Technology.</p><br><br></li></ul><strong>Requirements</strong><ul><li><p>Minimum <strong>5+ years</strong> of industrial electrical maintenance experience.</p><br><br></li><li><p>Experience maintaining old industrial machines and workshop equipment.</p><br><br></li><li><p>Strong knowledge of motors, generators, MCC panels, contactors, relays, breakers, and industrial wiring.</p><br><br></li><li><p>Ability to read and interpret electrical drawings and troubleshoot electrical faults.</p><br><br></li><li><p>Hands-on experience using multimeter, clamp meter, insulation tester, and other electrical diagnostic tools.</p><br><br></li><li><p>Oil &amp; Gas or industrial workshop experience preferred.</p><br><br></li><li><p>Willingness to work in Libya and remote project locations.</p><br><br></li></ul><strong>Preferred</strong><ul><li><p>Experience with generators and rotating equipment.</p><br><br></li><li><p>Basic PLC troubleshooting knowledge.</p><br><br></li><li><p>Experience in Oil &amp; Gas, marine, or heavy industry.</p><br><br></li><li><p>Basic English communication skills.</p><br><br></li></ul><strong>Benefits</strong><ul><li><p>Visa Provided</p><br><br></li><li><p>Joining Ticket</p><br><br></li><li><p>Food &amp; Accommodation Provided</p><br><br></li><li><p>Medical (Government Hospital)</p><br><br></li><li><p>Leave Pay as per Libyan Labour Law</p><br><br></li><li><p>Return Air Ticket to Home Country</p><br><br></li><li><p>Overtime as per company policy</p><br><br></li></ul><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Wellsite Supervisor Trainee assists and supports Field Engineers, Field Specialists, and Wellsite Supervisors at the wellsite, learning through hands-on training to achieve the minimum level of proficiency. This role provides exposure to oilfield operations, wellsite tasks, equipment, specific tools/services, and the Schlumberger culture. The trainee undergoes structured training to gain autonomy in delivering high-quality services to clients and applying business systems effectively.</p><p>Key Responsibilities</p><ul><li>Assist with technical support for basic downhole and surface equipment.</li><li>Become familiar with comprehensive oversight of risk management, adhering to the Zero Tolerance Rule Application.</li><li>Support Wellsite Customer / Drilling Contractor Engagement.</li><li>Assist with maintenance of basic equipment and tools.</li><li>Complete equipment calibration and wellsite integrity checks.</li><li>Ensure equipment compliance according to logging programs.</li><li>Prepare and validate orchestration programs / automated workflows.</li><li>Condition equipment and logging tools for agreed acquisition programs.</li><li>Provide Hardware LQC and troubleshooting as required.</li><li>Participate in all job reviews and debriefs.</li><li>Capture field data in the appropriate business system.</li><li>Manage deviations from job programs through proper Management of Change.</li><li>Manage and escalate service quality incidents.</li><li>Complete job packages and job closure.</li><li>Report HSE/SQ events and participate in investigations and closures.</li></ul><p>What We Offer</p><ul><li>Hands-on experience in wellsite supervision and field operations.</li><li>Exposure to oilfield equipment, logging tools, and risk management practices.</li><li>Structured training to develop autonomy in service delivery and business system utilization.</li><li>Career development opportunities within field operations and wellsite supervision.</li><li>A collaborative and safety-focused work environment.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Licence or Technician degree in Petroleum, Mechanical, Electrical, or a related field. Basic understanding of wellsite operations, equipment, and oilfield safety practices. Strong analytical, problem-solving, and technical skills. Ability to work collaboratively in field-based operational environments. Motivation to learn and grow in wellsite supervision and field operations.</p><p></p></section>